Order-Hotline
+372 6017 913
Payments
Pre-payment OR invoice
Shipping Services
DPD Classic International
ALM › Old Vehicle Part Search
Alle Ersatz-& Verschleißteile passend für VW TOURAN (1T1, 1T2) 2.0 TDI 16V
ABS Sensors (6)
Art. No . : 86836
MAPCO 86836 SENSOR, WHEEL SPEED
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Operating voltage: 12 V
- Supplementary Article/Info 2: without cable
- Sensor Type: Hall Sensor
- Number of Poles: 2
- Required quantity: 1
To the price display, please log in
Art. No . : 86836/2
MAPCO 86836/2 SENSOR, WHEEL SPEED
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Fitting Position: Front Axle left and right
- Required quantity: 1
- Required quantity: 1
To the price display, please log in
Art. No . : 86837
MAPCO 86837 SENSOR, WHEEL SPEED
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle Left
To the price display, please log in
Art. No . : 86837/2
MAPCO 86837/2 SENSOR, WHEEL SPEED
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Fitting Position: Rear Axle left and right
- Required quantity: 1
To the price display, please log in
Art. No . : 86838
MAPCO 86838 SENSOR, WHEEL SPEED
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Right
- Operating voltage: 12 V
- Supplementary Article/Info 2: without cable
- Number of Poles: 2
- Sensor Type: Hall Sensor
- Required quantity: 1
To the price display, please log in
Art. No . : 86839
MAPCO 86839 SENSOR, WHEEL SPEED
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle Right
To the price display, please log in
Accessories (1)
Art. No . : 76999
MAPCO 76999 TEST UNIT, SENSOR RING
Manufacturer: MAPCO
To the price display, please log in
Air Filter (1)
Art. No . : 60816
MAPCO 60816 AIR FILTER
Manufacturer: MAPCO
Product Info:
- Filter type: Filter Insert
- Length: 345 mm
- Width: 136 mm
- Height: 70 mm
To the price display, please log in
Air Mass Sensor (1)
Art. No . : 42814
MAPCO 42814 AIR MASS SENSOR
Manufacturer: MAPCO
Product Info:
- New Part
- Resistor Type: Hot-film Sensor
- Number of connectors: 5
To the price display, please log in
Alternator (4)
Art. No . : 13243
MAPCO 13243 ALTERNATOR
Manufacturer: MAPCO
Product Info:
- New Part
- Vehicle Main Current: for vehicles with 12V main current
- Voltage: 14 V
- Alternator Charge Current: 180 A
- Pulleys: with freewheel belt pulley
- Belt Pulley Ø: 56 mm
- Number of ribs: 6
To the price display, please log in
Art. No . : 13601
MAPCO 13601 ALTERNATOR
Manufacturer: MAPCO
Product Info:
- Voltage: 14,0 V
- Alternator Charge Current: 150,0 A
- Number of ribs: 6
- Belt Pulley Ø: 56 mm
- Pulleys: with freewheel belt pulley
- Vehicle Main Current: for vehicles with 12V main current
- New Part
To the price display, please log in
Art. No . : 13700
MAPCO 13700 ALTERNATOR
Manufacturer: MAPCO
Product Info:
- Voltage: 14,0 V
- Alternator Charge Current: 140,0 A
- Number of ribs: 6
- Belt Pulley Ø: 56 mm
- Pulleys: with freewheel belt pulley
- Vehicle Main Current: for vehicles with 12V main current
- New Part
To the price display, please log in
Art. No . : 13700/2
MAPCO 13700/2 ALTERNATOR
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Supplementary Article/Info 2: with belt
- Vehicle Equipment: for vehicles with air conditioning
To the price display, please log in
Alternator Freewheel Clutch (1)
Art. No . : 14700
MAPCO 14700 FREEWHEEL CLUTCH, ALTERNATOR
Manufacturer: MAPCO
Product Info:
- Supplementary Article/Info 2: Requires special tools for mounting
- Driven Units: Driven unit: alternator
Manufacturer Restriction: Bosch
Alternator Charge Current [A]: 110
for OE number: 06F903023D
Alternator Charge Current [A]: 140
for OE number: 06F903023F
---------
Driven Units: Driven unit: alternator
Manufacturer Restriction: Valeo
Alternator Charge Current [A]: 110
for OE number: 06F903023E
Alternator Charge Current [A]: 140
for OE number: 06F903023C
To the price display, please log in
Ball Joint (2)
Art. No . : 51724
MAPCO 51724 BALL JOINT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Fitting Position: Lower
- Outer thread: M12x1,5 mm
- Cone Size: 15,3 mm
- Supplementary Article/Info 2: with fastening material
- Paired article numbers: 51725
- Required quantity: 1
To the price display, please log in
Art. No . : 51725
MAPCO 51725 BALL JOINT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Right
- Fitting Position: Lower
- Outer thread: M12x1,5 mm
- Cone Size: 15,3 mm
- Supplementary Article/Info 2: with fastening material
- Paired article numbers: 51724
- Required quantity: 1
To the price display, please log in
Bellow Steering (2)
Art. No . : 17784
MAPCO 17784 BELLOW, STEERING
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle left and right
- Inner diameter 1: 15,0 mm
- Inner diameter 2: 49,5 mm
- Height: 186,0 mm
- Vehicle Equipment: for vehicles with power steering
To the price display, please log in
Art. No . : 29997/1
MAPCO 29997/1 BELLOW SET, STEERING
Manufacturer: MAPCO
Product Info:
- Inner diameter 1: 10,0 mm
- Inner diameter 2: 27,0 mm
- Height: 17,0 mm
To the price display, please log in
Brake & Clutch Cables (1)
Art. No . : 5543
MAPCO 5543 CABLE, PARKING BRAKE
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear
- Brake Type: Disc Brake
- Length 1/ Length 2: 1550/895 mm
- Required quantity: 2
- Construction year to: 2006/01
for PR number: 1SA
for PR number: 1SB
To the price display, please log in
Brake Calipers (6)
Art. No . : 4814
MAPCO 4814 BRAKE CALIPER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle Left
- Brake System: BOSCH
- Brake Disc Thickness: 10 mm
- Brake Caliper Type: Brake Caliper (1 piston)
- Diameter: 38 mm
- for brake disc diameter: 272 mm
- Construction year from: 2009/11
for PR number: 1KS
To the price display, please log in
Art. No . : 4815
MAPCO 4815 BRAKE CALIPER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle Right
- Brake System: BOSCH
- Brake Disc Thickness: 10 mm
- Brake Caliper Type: Brake Caliper (1 piston)
- Diameter: 38 mm
- for brake disc diameter: 272 mm
- for PR number: 1KS
To the price display, please log in
Art. No . : 4848
MAPCO 4848 BRAKE CALIPER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle Left
- Brake Caliper Type: Fist-type Caliper
- Diameter: 41,0 mm
- Brake System: TRW
- for brake disc thickness: 12 mm
- for brake disc diameter: 256 mm
- Paired article numbers: 4849
To the price display, please log in
Art. No . : 4849
MAPCO 4849 BRAKE CALIPER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle Right
- Brake Caliper Type: Fist-type Caliper
- Diameter: 41,0 mm
- Brake System: TRW
- for brake disc thickness: 12 mm
- for brake disc diameter: 256 mm
- Paired article numbers: 4848
To the price display, please log in
Art. No . : 4898
MAPCO 4898 BRAKE CALIPER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- New Part
- Brake System: ATE
- Brake Caliper Type: Fist-type Caliper
- Diameter: 54 mm
- Paired article numbers: 4899
- for PR number: 1LJ;1ZD
To the price display, please log in
Art. No . : 4899
MAPCO 4899 BRAKE CALIPER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Right
- New Part
- Brake System: ATE
- Brake Caliper Type: Fist-type Caliper
- Diameter: 54 mm
- Paired article numbers: 4898
- for PR number: 1ZE;1ZP
To the price display, please log in
Brake Discs (20)
Art. No . : 25830
MAPCO 25830 BRAKE DISC
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle
- Outer diameter: 288,0 mm
- Bore Ø: 15,3 mm
- Height: 49,9 mm
- Brake Disc Type: Vented
- Brake Disc Thickness: 25,0 mm
- Minimum thickness: 22,0 mm
- Number of Holes: 5
- Inner diameter: 144,0 mm
- Centering Diameter: 65,0 mm
- Bolt Hole Circle Ø: 112,0 mm
- Weight: 7,2 kg
- for PR number: 1ZE
1ZP
To the price display, please log in
Art. No . : 25830/2
MAPCO 25830/2 BRAKE DISC
Manufacturer: MAPCO
Product Info:
- Required quantity: 1
- Fitting Position: Front Axle
- Outer diameter: 288,0 mm
- Bore Ø: 15,3 mm
- Height: 49,9 mm
- Brake Disc Type: Vented
- Brake Disc Thickness: 25,0 mm
- Minimum thickness: 22,0 mm
- Number of Holes: 5
- Inner diameter: 144,0 mm
- Centering Diameter: 65,0 mm
- Bolt Hole Circle Ø: 112,0 mm
- Quantity Unit: Kit
- Multi-piece: Multi-piece
- for PR number: 1ZE
To the price display, please log in
Art. No . : 25830C
MAPCO 25830C BRAKE DISC
Manufacturer: MAPCO
Product Info:
- Surface: Coated
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Outer diameter: 288 mm
- Brake Disc Thickness: 25 mm
- Minimum thickness: 22 mm
- Height: 49,9 mm
- Inner diameter: 144 mm
- Bore Ø: 15,3 mm
- Number of Holes: 5
- Bolt Hole Circle Ø: 112 mm
- Centering Diameter: 65 mm
- Weight: 7,2 kg
- Quality: Kreuzschliff
- for PR number: 1ZE
1ZP
To the price display, please log in
Art. No . : 25830C/2
MAPCO 25830C/2 BRAKE DISC
Manufacturer: MAPCO
Product Info:
- Surface: Coated
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Outer diameter: 288 mm
- Brake Disc Thickness: 25 mm
- Minimum thickness: 22 mm
- Height: 49,9 mm
- Inner diameter: 144 mm
- Bore Ø: 15,3 mm
- Number of Holes: 5
- No. of holes 2: 9
- Bolt Hole Circle Ø: 112 mm
- Centering Diameter: 65 mm
- Machining: High-carbon
- for PR number: 1ZE
1ZP
To the price display, please log in
Art. No . : 25833
MAPCO 25833 BRAKE DISC
Manufacturer: MAPCO
Product Info:
- Brake Disc Type: Vented
- Outer diameter: 312 mm
- Brake Disc Thickness: 25 mm
- Minimum thickness: 22 mm
- Height: 49,9 mm
- Inner diameter: 146 mm
- Bore Ø: 15,3 mm
- Number of Holes: 5
- No. of holes 2: 9
- Bolt Hole Circle Ø: 112 mm
- Centering Diameter: 65 mm
- Machining: High-carbon
- Fitting Position: Front Axle
for PR number: 1LJ
---------
for PR number: 1ZD
---------
for PR number: 1ZA
To the price display, please log in
Art. No . : 25833/2
MAPCO 25833/2 BRAKE DISC
Manufacturer: MAPCO
Product Info:
- Required quantity: 1
- Outer diameter: 312,0 mm
- Brake Disc Type: Vented
- Fitting Position: Front Axle
- Brake Disc Thickness: 25 mm
- Number of Holes: 5
- Bolt Hole Circle Ø: 112 mm
- Quantity Unit: Kit
- Multi-piece: Multi-piece
To the price display, please log in
Art. No . : 25833C
MAPCO 25833C BRAKE DISC
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle
- Surface: Coated
- Brake Disc Type: Vented
- Outer diameter: 312 mm
- Brake Disc Thickness: 25 mm
- Minimum thickness: 22 mm
- Height: 49,9 mm
- Inner diameter: 146 mm
- Bore Ø: 15,3 mm
- Number of Holes: 5
- No. of holes 2: 9
- Bolt Hole Circle Ø: 112 mm
- Centering Diameter: 65 mm
- Machining: High-carbon
- for PR number: 1LJ
1ZA
1ZD
To the price display, please log in
Art. No . : 25833C/2
MAPCO 25833C/2 BRAKE DISC
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle
- Surface: Coated
- Brake Disc Type: Vented
- Outer diameter: 312 mm
- Brake Disc Thickness: 25 mm
- Minimum thickness: 22 mm
- Height: 49,9 mm
- Inner diameter: 146 mm
- Bore Ø: 15,3 mm
- Number of Holes: 5
- No. of holes 2: 9
- Bolt Hole Circle Ø: 112 mm
- Centering Diameter: 65 mm
- Machining: High-carbon
- for PR number: 1LJ
1ZA
1ZD
To the price display, please log in
Art. No . : 25837
MAPCO 25837 BRAKE DISC
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Brake Disc Type: Solid
- Outer diameter: 256 mm
- Brake Disc Thickness: 12,0 mm
- Minimum thickness: 10,0 mm
- Height: 48,6 mm
- Inner diameter: 140,0 mm
- Bore Ø: 15,3 mm
- Number of Holes: 5
- Bolt Hole Circle Ø: 112,0 mm
- Centering Diameter: 65,0 mm
- Construction year to: 2009/10
To the price display, please log in
Art. No . : 25837/2
MAPCO 25837/2 BRAKE DISC
Manufacturer: MAPCO
Product Info:
- Required quantity: 1
- Fitting Position: Rear Axle
- Brake Disc Type: Solid
- Brake Disc Thickness: 12,0 mm
- Minimum thickness: 10,0 mm
- Outer diameter: 256 mm
- Bolt Hole Circle Ø: 112,0 mm
- Number of Holes: 5
- Height: 48,6 mm
- Centering Diameter: 65,0 mm
- Inner diameter: 140,0 mm
- Quantity Unit: Kit
- Multi-piece: Multi-piece
To the price display, please log in
Art. No . : 25837C
MAPCO 25837C BRAKE DISC
Manufacturer: MAPCO
Product Info:
- Surface: Coated
- Fitting Position: Rear Axle
- Brake Disc Type: Solid
- Outer diameter: 256 mm
- Brake Disc Thickness: 12 mm
- Minimum thickness: 10 mm
- Height: 48,6 mm
- Inner diameter: 140 mm
- Number of Holes: 5
- Bolt Hole Circle Ø: 112 mm
- Centering Diameter: 65 mm
- Construction year to: 2009/10
To the price display, please log in
Art. No . : 25837C/2
MAPCO 25837C/2 BRAKE DISC
Manufacturer: MAPCO
Product Info:
- Required quantity: 1
- Construction year to: 2009/10
To the price display, please log in
Art. No . : 25841
MAPCO 25841 BRAKE DISC
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Brake Disc Type: Solid
- Outer diameter: 286 mm
- Brake Disc Thickness: 12,0 mm
- Minimum thickness: 10,0 mm
- Height: 48,6 mm
- Inner diameter: 159,0 mm
- Bore Ø: 15,3 mm
- Number of Holes: 5
- No. of holes 2: 9
- Bolt Hole Circle Ø: 112 mm
- Centering Diameter: 65 mm
To the price display, please log in
Art. No . : 25841/2
MAPCO 25841/2 BRAKE DISC
Manufacturer: MAPCO
Product Info:
- Required quantity: 1
- Fitting Position: Rear Axle
- Outer diameter: 286,0 mm
- Brake Disc Thickness: 12,0 mm
- Brake Disc Type: Solid
- Number of Holes: 5
- No. of holes 2: 9
- Bolt Hole Circle Ø: 112 mm
- Height: 48,6 mm
- Centering Diameter: 65 mm
- Quantity Unit: Kit
- Multi-piece: Multi-piece
To the price display, please log in
Art. No . : 25841C
MAPCO 25841C BRAKE DISC
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Surface: Coated
- Brake Disc Type: Solid
- Outer diameter: 286 mm
- Brake Disc Thickness: 12 mm
- Minimum thickness: 10 mm
- Height: 48,6 mm
- Inner diameter: 159 mm
- Bore Ø: 15,3 mm
- Number of Holes: 5
- No. of holes 2: 9
- Bolt Hole Circle Ø: 112 mm
- Centering Diameter: 65 mm
- for PR number: 1KJ
To the price display, please log in
Art. No . : 25841C/2
MAPCO 25841C/2 BRAKE DISC
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Surface: Coated
- Brake Disc Type: Solid
- Outer diameter: 286 mm
- Brake Disc Thickness: 12 mm
- Minimum thickness: 10 mm
- Height: 48,6 mm
- Inner diameter: 159 mm
- Bore Ø: 15,3 mm
- Number of Holes: 5
- No. of holes 2: 9
- Bolt Hole Circle Ø: 112 mm
- Centering Diameter: 65 mm
- for PR number: 1KJ
To the price display, please log in
Art. No . : 45837
MAPCO 45837 BRAKE DISC
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Brake Disc Type: Solid
- Brake Disc Thickness: 10,0 mm
- Number of Holes: 5
- Outer diameter: 272 mm
- Height: 48 mm
- Bolt Hole Circle Ø: 112 mm
- for PR number: 1KS
To the price display, please log in
To the price display, please log in
Art. No . : 45837C
MAPCO 45837C BRAKE DISC
Manufacturer: MAPCO
Product Info:
- Surface: Coated
- Fitting Position: Rear Axle
- Brake Disc Type: Solid
- Brake Disc Thickness: 10,0 mm
- Number of Holes: 5
- Outer diameter: 272 mm
- Height: 48 mm
- Bolt Hole Circle Ø: 112 mm
- for PR number: 1KS
To the price display, please log in
Art. No . : 45837C/2
MAPCO 45837C/2 BRAKE DISC
Manufacturer: MAPCO
Product Info:
- Required quantity: 1
To the price display, please log in
Brake Fluid (2)
Art. No . : 9040/2
MAPCO 9040/2 BRAKE FLUID
Manufacturer: MAPCO
Product Info:
- DOT specification: DOT 4
- Packing Type: Bottle
- Content: 1 litre
- Dry Boiling Point: 260 °C
- Wet Boiling Point: 160 °C
To the price display, please log in
Art. No . : 9040/3
MAPCO 9040/3 BRAKE FLUID
Manufacturer: MAPCO
Product Info:
- DOT specification: DOT 4
- Packing Type: Canister
- Content: 5 litre
- Dry Boiling Point: 260 °C
- Wet Boiling Point: 160 °C
To the price display, please log in
Brake Hoses (2)
Art. No . : 3964
MAPCO 3964 BRAKEHOSE
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle left and right
- Length: 580 mm
- Inner thread: M10 x 1 mm
- Outer diameter: 10 mm
- Required quantity: 2
To the price display, please log in
Art. No . : 3965
MAPCO 3965 BRAKEHOSE
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Length: 256 mm
- Inner thread 1: M10x1 mm
- Inner thread 2: M10x1 mm
- Spanner Size: 17/17
- Construction year to: 2005/12
Required quantity: 2
To the price display, please log in
Brake Kits (10)
Art. No . : 47830
MAPCO 47830 BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle
- Outer diameter: 288 mm
- Brake System: ATE
- Number of wear indicators: 2,0 per axle
- Wear Warning Contact: incl. wear warning contact
- Brake Disc Thickness: 25,0 mm
- Quantity Unit: Kit
- Multi-piece: Multi-piece
- for PR number: 1ZE
To the price display, please log in
Art. No . : 47830/9HPS
MAPCO 47830/9HPS BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Required quantity: 1
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Outer diameter: 288 mm
- Brake Disc Thickness: 25 mm
- Bore Ø: 15,3 mm
- Number of Holes: 5
- Bolt Hole Circle Ø: 112 mm
- Quality: HPS standard
- Brake System: ATE
- Wear Warning Contact: incl. wear warning contact
- Number of wear indicators: 1 per axle
- Warning Contact Length: 155 mm
To the price display, please log in
Art. No . : 47830HPS
MAPCO 47830HPS BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Fitting Position: Front Axle
- Surface: Coated
- Brake Disc Type: Vented
- Outer diameter: 288 mm
- Brake Disc Thickness: 25 mm
- Minimum thickness: 22 mm
- Height: 49,9 mm
- Inner diameter: 144 mm
- Bore Ø: 15,3 mm
- Number of Holes: 5
- No. of holes 2: 9
- Bolt Hole Circle Ø: 112 mm
- Centering Diameter: 65 mm
- Machining: High-carbon
- Brake System: ATE
- Width 1: 155,1 mm
- Height 1: 66 mm
- Brake Disc Thickness: 20,6 mm
- Wear Warning Contact: incl. wear warning contact
- Warning Contact Length: 155 mm
- Number of wear indicators: 1 per axle
To the price display, please log in
Art. No . : 47833
MAPCO 47833 BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle
- Outer diameter: 312 mm
- Brake Disc Thickness: 25,0 mm
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø: 112 mm
- Number of wear indicators: 2,0 per axle
- Brake System: ATE
- Quantity Unit: Kit
- Multi-piece: Multi-piece
To the price display, please log in
Art. No . : 47833HPS
MAPCO 47833HPS BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Fitting Position: Front Axle
- Quantity Unit: Kit
- Multi-piece: Multi-piece
- Machining: High-carbon
- Surface: Coated
- Brake System: ATE
- Brake Disc Type: Vented
- Outer diameter: 312 mm
- Brake Disc Thickness: 25 mm
- Number of Holes: 5
- Wear Warning Contact: incl. wear warning contact
- Number of wear indicators: 1 per axle
- Supplementary Article/Info 2: with anti-squeak plate
- Required quantity: 1
To the price display, please log in
Art. No . : 47837
MAPCO 47837 BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Outer diameter: 256 mm
- Fitting Position: Rear Axle
- Brake Disc Thickness: 12 mm
- Brake Disc Type: Solid
- Number of Holes: 5
- Bolt Hole Circle Ø: 112 mm
- Quality: Kreuzschliff
- Wear Warning Contact: prepared for wear indicator
- Brake System: LUCAS
- Quantity Unit: Kit
- Multi-piece: Multi-piece
- Construction year to: 2009/10
To the price display, please log in
Art. No . : 47837HPS
MAPCO 47837HPS BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Brake System: Lucas / TRW
- Brake Disc Type: Solid
- Fitting Position: Rear Axle
- Surface: Coated
- Outer diameter: 256 mm
- Brake Disc Thickness: 12 mm
- Minimum thickness: 10 mm
- Height: 48,6 mm
- Inner diameter: 140 mm
- Bore Ø: 15,3 mm
- Number of Holes: 5
- No. of holes 2: 9
- Bolt Hole Circle Ø: 112 mm
- Centering Diameter: 65 mm
- Machining: High-carbon
- Width: 105,3 mm
- Brake Disc Thickness: 17,1 mm
- Wear Warning Contact: prepared for wear indicator
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article/Supplementary Info: with accessories
- Supplementary Article/Info 2: with brake caliper screws
- Number of screws: 4
To the price display, please log in
Art. No . : 47841
MAPCO 47841 BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Outer diameter: 282 mm
- Brake Disc Thickness: 12,0 mm
- Brake Disc Type: Solid
- Number of Holes: 5
- Bolt Hole Circle Ø: 112 mm
- Wear Warning Contact: excl. wear warning contact
- Brake System: LUCAS
- Quantity Unit: Kit
- Multi-piece: Multi-piece
To the price display, please log in
Art. No . : 47841HPS
MAPCO 47841HPS BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Fitting Position: Rear Axle
- Surface: Coated
- Brake Disc Type: Solid
- Supplementary Article/Info 2: with screws
- Outer diameter: 282 mm
- Brake Disc Thickness: 12 mm
- Minimum thickness: 10 mm
- Height: 48,6 mm
- Inner diameter: 159 mm
- Bore Ø: 15,3 mm
- Number of Holes: 5
- No. of holes 2: 9
- Bolt Hole Circle Ø: 112 mm
- Centering Diameter: 65 mm
- Brake System: Lucas / TRW
- Width: 105,3 mm
- Brake Disc Thickness: 17,1 mm
- Wear Warning Contact: prepared for wear indicator
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article/Supplementary Info: with accessories
- Supplementary Article/Info 2: with brake caliper screws
- Number of screws: 4
- for PR number: 1KJ
To the price display, please log in
Art. No . : 47906
MAPCO 47906 BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Outer diameter: 282 mm
- Brake Disc Thickness: 12 mm
- Brake Disc Type: Solid
- Number of Holes: 5
- Quality: Kreuzschliff
- Wear Warning Contact: prepared for wear indicator
- Brake System: TRW
- Quantity Unit: Kit
- Multi-piece: Multi-piece
To the price display, please log in
Brake Pads (7)
Art. No . : 6695
MAPCO 6695 BRAKE PAD SET, DISC BRAKE
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle
- Brake System: ATE
- Supplementary Article/Info 2: with anti-squeak plate
- Wear Warning Contact: incl. wear warning contact
- Width: 155,1 mm
- Thickness: 20,6 mm
- Height: 66,0 mm
- Number of wear indicators: 1 per axle
- for PR number: 1ZD
1ZE
1ZP
for PR number: 1ZA
1LJ
To the price display, please log in
Art. No . : 6695HPS
MAPCO 6695HPS BRAKE PAD SET, DISC BRAKE
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Fitting Position: Front Axle
- Brake System: ATE
- Width 1: 155,1 mm
- Height 1: 66 mm
- Width 2: 156,3 mm
- Height 2: 71,3 mm
- Thickness: 20,6 mm
- Wear Warning Contact: incl. wear warning contact
- Number of wear indicators: 1 per axle
- Warning Contact Length: 155 mm
- for PR number: 1ZD
1ZE
1ZP
for PR number: 1ZA
1LJ
To the price display, please log in
Art. No . : 6696
MAPCO 6696 BRAKE PAD SET, DISC BRAKE
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Brake System: Lucas / TRW
- Width: 105,5 mm
- Height: 55,9 mm
- Thickness: 17,1 mm
- Wear Warning Contact: prepared for wear indicator
- Supplementary Article/Info 2: with anti-squeak plate
To the price display, please log in
Art. No . : 6696/1
MAPCO 6696/1 BRAKE PAD SET, DISC BRAKE
Manufacturer: MAPCO
Product Info:
- Brake System: Lucas / TRW
- Vehicle Equipment: for vehicles without electric parking brake
- Fitting Position: Rear Axle
- Width: 105,3 mm
- Height: 55,9 mm
- Thickness: 17,1 mm
- Wear Warning Contact: prepared for wear indicator
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article/Supplementary Info: with accessories
- Supplementary Article/Info 2: with brake caliper screws
- for PR number: 1KE
1KF
1KJ
To the price display, please log in
Art. No . : 6696/1HPS
MAPCO 6696/1HPS BRAKE PAD SET, DISC BRAKE
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Fitting Position: Rear Axle
- Brake Disc Type: Solid
- Brake System: Lucas / TRW
- Observe dimensions
- Vehicle Equipment: for vehicles without electric parking brake
- Width: 105,3 mm
- Height: 55,9 mm
- Thickness: 17,1 mm
- Wear Warning Contact: prepared for wear indicator
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article/Supplementary Info: with accessories
- Supplementary Article/Info 2: with brake caliper screws
- for PR number: 1KE
1KF
1KJ
To the price display, please log in
Art. No . : 6914
MAPCO 6914 BRAKE PAD SET, DISC BRAKE
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Width: 105,5 mm
- Height: 56 mm
- Thickness: 17 mm
- Wear Warning Contact: excl. wear warning contact
- Brake System: TRW
- Supplementary Article/Info 2: with anti-squeak plate
- Supplementary Article/Supplementary Info: with accessories
- Supplementary Article/Info 2: with brake caliper screws
- Number of screws: 4
To the price display, please log in
Art. No . : 6959
MAPCO 6959 BRAKE PAD SET, DISC BRAKE
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Brake System: Bosch
- Wear Warning Contact: excl. wear warning contact
- Thickness: 16,5 mm
- Width: 109,3 mm
- Height: 53,3 mm
- Supplementary Article/Info 2: with anti-squeak plate
- for PR number: 1KS
To the price display, please log in
Bushings (12)
Art. No . : 36791
MAPCO 36791 CONTROL ARM-/TRAILING ARM BUSH
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber-Metal Mount
- Steering arm type: for drag link
- Fitting Position: Rear Axle left and right
- Inner diameter: 12 mm
- Outer diameter: 60 mm
- Required quantity: 2
To the price display, please log in
Art. No . : 36939
MAPCO 36939 CONTROL ARM-/TRAILING ARM BUSH
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber-Metal Mount
- Steering arm type: for control arm
- Fitting Position: Front Axle
- Fitting Position: Rear
- Inner diameter: 19,0 mm
- Outer diameter: 65 mm
- Height: 50 mm
- Required quantity: 2
To the price display, please log in
Art. No . : 36939HPS
MAPCO 36939HPS CONTROL ARM-/TRAILING ARM BUSH
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Mounting Type: Rubber-Metal Mount
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Fitting Position: Rear
- Inner diameter: 19 mm
- Outer diameter: 65 mm
- Height: 50 mm
- Required quantity: 2
To the price display, please log in
Art. No . : 36948
MAPCO 36948 CONTROL ARM-/TRAILING ARM BUSH
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber-Metal Mount
- Steering arm type: for control arm
- Material: Aluminium
- Fitting Position: Front Axle Left
- Fitting Position: Lower
- Fitting Position: Rear
- Required quantity: 1
- Paired article numbers: 36949
To the price display, please log in
Art. No . : 36949
MAPCO 36949 CONTROL ARM-/TRAILING ARM BUSH
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber-Metal Mount
- Steering arm type: for control arm
- Material: Aluminium
- Fitting Position: Front Axle Right
- Fitting Position: Lower
- Fitting Position: Rear
- Required quantity: 1
- Paired article numbers: 36948
To the price display, please log in
Art. No . : 36950
MAPCO 36950 CONTROL ARM-/TRAILING ARM BUSH
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber-Metal Mount
- Steering arm type: for control arm
- Fitting Position: Front Axle left and right
- Fitting Position: Lower
- Fitting Position: Front
- Inner diameter: 12,0 mm
- Outer diameter: 40 mm
- Required quantity: 2
To the price display, please log in
Art. No . : 37891
MAPCO 37891 CONTROL ARM-/TRAILING ARM BUSH
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber-Metal Mount
- Fitting Position: Rear Axle left and right
- Fitting Position: Lower
- Inner diameter: 12 mm
- Outer diameter: 42 mm
- Required quantity: 2
To the price display, please log in
Art. No . : 37892
MAPCO 37892 CONTROL ARM-/TRAILING ARM BUSH
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber-Metal Mount
- Steering arm type: for control arm
- Fitting Position: Rear Axle left and right
- Fitting Position: Upper
- Fitting Position: inner
- Required quantity: 2
To the price display, please log in
Art. No . : 37893
MAPCO 37893 CONTROL ARM-/TRAILING ARM BUSH
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber-Metal Mount
- Steering arm type: for control arm
- Fitting Position: Rear Axle left and right
- Fitting Position: Upper
- Fitting Position: Outer
- Required quantity: 2
To the price display, please log in
Art. No . : 38832
MAPCO 38832 STABILISER MOUNTING
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber Bush
- Fitting Position: Rear Axle left and right
- Inner diameter: 21.5 mm
- Required quantity: 2
- Model year from: 2007
To the price display, please log in
Art. No . : 38897
MAPCO 38897 MOUNTING, AXLE BEAM
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber-Metal Mount
- Fitting Position: Rear Axle left and right
- Fitting Position: Lower
- Fitting Position: Outer
- Inner diameter: 12 mm
- Outer diameter: 38 mm
- Height: 50 mm
- Required quantity: 2
To the price display, please log in
Art. No . : 53822HPS
MAPCO 53822HPS REPAIR KIT, STABILIZER SUSPENSION
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Mounting Type: Rubber Bush
- Quantity Unit: Kit
- Fitting Position: Rear Axle left and right
- Inner diameter: 21.5 mm
- Supplementary Article/Info 2: with coupling rod
- Required quantity: 1
To the price display, please log in
CV Boot Kit (17)
Art. No . : 17983
MAPCO 17983 MOUNTING CONE, BELLOW
Manufacturer: MAPCO
Product Info:
- Diameter to: 94 mm
To the price display, please log in
Art. No . : 17984
MAPCO 17984 MOUNTING CONE, BELLOW
Manufacturer: MAPCO
Product Info:
- Diameter to: 110 mm
To the price display, please log in
Art. No . : 17988
MAPCO 17988 HOSE CLAMP
Manufacturer: MAPCO
Product Info:
- Diameter from: 25,0 mm
- Diameter to: 125,0 mm
- Scope: 100,0 mm
- Quantity Unit: Piece
- Required quantity: 1
To the price display, please log in
Art. No . : 17988/10
MAPCO 17988/10 HOSE CLAMP
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Diameter from: 25 mm
- Diameter to: 125 mm
- Scope: 100 mm
- Manufacturer Restriction: 10 Stück im Beutel
To the price display, please log in
Art. No . : 17988/50
MAPCO 17988/50 HOSE CLAMP
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Quality: 50 Stk im Beutel
- Diameter from: 25 mm
- Diameter to: 125 mm
- Scope: 100 mm
To the price display, please log in
Art. No . : 17988/9
MAPCO 17988/9 CLAMPING PLIERS, BELLOW
Manufacturer: MAPCO
To the price display, please log in
Art. No . : 17991
MAPCO 17991 BELLOW, DRIVESHAFT
Manufacturer: MAPCO
Product Info:
- Height: 145 mm
- Manufacturer Restriction: für Transporter
To the price display, please log in
Art. No . : 18801
MAPCO 18801 BELLOW SET, DRIVE SHAFT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Transmission End
- Height: 85 mm
- Inner diameter 1: 24,0 mm
- Inner diameter 2: 70 mm
- Transmission Type: Automatic Transmission
To the price display, please log in
Art. No . : 18812
MAPCO 18812 BELLOW SET, DRIVE SHAFT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle
- Fitting Position: Wheel Side
- Height: 115 mm
- Inner diameter 1: 29 mm
- Inner diameter 2: 96 mm
- Material: Thermoplast
- Chassis number to: 1T7029578
Construction year from: 2006/11
To the price display, please log in
Art. No . : 18814
MAPCO 18814 BELLOW SET, DRIVE SHAFT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle
- Fitting Position: Wheel Side
- Height: 127,5 mm
- Inner diameter 1: 30,5 mm
- Inner diameter 2: 103,5 mm
- Material: Thermoplast
To the price display, please log in
Art. No . : 18978
MAPCO 18978 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- Reinforced Version
- Quality: Für PKW
To the price display, please log in
Art. No . : 18979
MAPCO 18979 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- Reinforced Version
- Number of Parts: 4 parts
- Quality: für Transporter
To the price display, please log in
Art. No . : 18990
MAPCO 18990 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- Inner diameter 2 of: 55 mm
- Inner diameter 2 to: 90 mm
- Manufacturer Restriction: für PKW
To the price display, please log in
Art. No . : 18990/2
MAPCO 18990/2 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- Supplementary Article/Info 2: with clamps
To the price display, please log in
Art. No . : 18990/3
MAPCO 18990/3 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
To the price display, please log in
Art. No . : 18990/6
MAPCO 18990/6 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Multi-piece: Multi-piece
- Supplementary Article/Info 2: with clamps
To the price display, please log in
Art. No . : 18991
MAPCO 18991 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- Inner diameter 2 of: 90 mm
- Inner diameter 2 to: 120 mm
- Manufacturer Restriction: für Transporter
To the price display, please log in
Central Slave Cylinder & Releaser (1)
Art. No . : 12850
MAPCO 12850 CENTRAL SLAVE CYLINDER, CLUTCH
Manufacturer: MAPCO
Product Info:
- New Part
- Operating Mode: Hydraulic
- Bore Ø: 29 mm
- Material: Plastic
- Engine Code: BKD
Transmission Type: 6-Speed Manual Transmission
---------
Engine Code: BKD
To the price display, please log in
Chemical Products (3)
Art. No . : 17987
MAPCO 17987 UNIVERSAL LUBRICANT
Manufacturer: MAPCO
Product Info:
- Packing Type: Spraycan
- Chemical Properties: Silicon-free
- Chemical Properties: Thin
- Quantity Unit: Tin
- Manufacturer Restriction: Montage-Spray
- Supplementary Article/Info 2: with PTFE (polytetrafluoroethylene)
To the price display, please log in
Art. No . : 9040/2
MAPCO 9040/2 BRAKE FLUID
Manufacturer: MAPCO
Product Info:
- DOT specification: DOT 4
- Packing Type: Bottle
- Content: 1 litre
- Dry Boiling Point: 260 °C
- Wet Boiling Point: 160 °C
To the price display, please log in
Art. No . : 9040/3
MAPCO 9040/3 BRAKE FLUID
Manufacturer: MAPCO
Product Info:
- DOT specification: DOT 4
- Packing Type: Canister
- Content: 5 litre
- Dry Boiling Point: 260 °C
- Wet Boiling Point: 160 °C
To the price display, please log in
Clutch & Clutch Components (1)
Art. No . : 10791
MAPCO 10791 CLUTCH KIT
Manufacturer: MAPCO
Product Info:
- New Part
- Diameter 1: 240 mm
- Diameter 2: 240 mm
- Number of Teeth: 23
- for flywheel manufacturer: LUK
- Supplementary Article/Supplementary Info: with clutch pressure plate
- Supplementary Article/Supplementary Info: without central slave cylinder
- Supplementary Article/Info 2: with clutch plate
- Supplementary Article/Info 2: with flywheel
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Engine Code: BKD
Transmission Type: GNE
HDU
JLT
Transmission Type: Manual Transmission
To the price display, please log in
Clutch Master Slave Cylinder (2)
Art. No . : 1890
MAPCO 1890 MASTER CYLINDER, CLUTCH
Manufacturer: MAPCO
Product Info:
- Diameter: 15,57 mm
- Material: Plastic
- Construction year to: 2009/10
To the price display, please log in
Art. No . : 2892
MAPCO 2892 SLAVE CYLINDER, CLUTCH
Manufacturer: MAPCO
Product Info:
- Diameter: 19,05 mm
- Material: Plastic
- Construction year from: 2009/11
for PR number: 0EM
To the price display, please log in
Clutch Repair Kits (1)
Art. No . : 10791
MAPCO 10791 CLUTCH KIT
Manufacturer: MAPCO
Product Info:
- New Part
- Diameter 1: 240 mm
- Diameter 2: 240 mm
- Number of Teeth: 23
- for flywheel manufacturer: LUK
- Supplementary Article/Supplementary Info: with clutch pressure plate
- Supplementary Article/Supplementary Info: without central slave cylinder
- Supplementary Article/Info 2: with clutch plate
- Supplementary Article/Info 2: with flywheel
- Clutch: Conversion from dual-mass flywheel to single-mass flywheel
- Engine Code: BKD
Transmission Type: GNE
HDU
JLT
Transmission Type: Manual Transmission
To the price display, please log in
Coil Springs (5)
Art. No . : 71876
MAPCO 71876 COIL SPRING
Manufacturer: MAPCO
Product Info:
- Spring Design: Coil Spring
- Fitting Position: Front Axle
- Thickness: 13,4 mm
- Diameter: 146,0 mm
- Number of Coils: 5,7
- Length: 342,0 mm
- Replace in pairs only
To the price display, please log in
Art. No . : 71876/2
MAPCO 71876/2 SUSPENSION KIT, COIL SPRINGS
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Spring Design: Coil Spring
- Fitting Position: Front Axle
- Thickness: 13,4 mm
- Diameter: 146 mm
- Number of Coils: 5,7
- Length: 342 mm
- Required quantity: 1
To the price display, please log in
Art. No . : 71888
MAPCO 71888 COIL SPRING
Manufacturer: MAPCO
Product Info:
- Replace in pairs only
- Fitting Position: Rear Axle
- Spring Design: Coil Spring
- Thickness: 12.5 mm
- Diameter: 116 mm
- Length: 365 mm
- Number of Coils: 8,3
- Required quantity: 2
To the price display, please log in
Art. No . : 72811
MAPCO 72811 COIL SPRING
Manufacturer: MAPCO
Product Info:
- Spring Design: Coil Spring
- Reinforced Version
- Fitting Position: Rear Axle
- Thickness: 13,2 mm
- Diameter: 116,0 mm
- Length: 335,0 mm
- Number of Coils: 8,2
- Required quantity: 2
- Replace in pairs only
To the price display, please log in
Art. No . : 72811/2
MAPCO 72811/2 SUSPENSION KIT, COIL SPRINGS
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Spring Design: Coil Spring
- Reinforced Version
- Fitting Position: Rear Axle
- Thickness: 13,2 mm
- Diameter: 116 mm
- Length: 335 mm
- Number of Coils: 8,2
- Required quantity: 1
To the price display, please log in
Drive Shafts Stub Axle Differential (4)
Art. No . : 16751
MAPCO 16751 DRIVE SHAFT
Manufacturer: MAPCO
Product Info:
- New Part
- Used part return not required
- Fitting Position: Front Axle Left
- Length: 488 mm
- Outer gearing wheel side: 36
- Seal Diameter: 59,54 mm
- Wheel-side joint diameter: 98 mm
- Transmission-side joint diameter: 108 mm
- Thread Size: M16X1.5
- Bore Ø: 10,2 mm
- Number of Bores: 6
- Bolt Hole Circle Ø: 94 mm
- Construction year to: 2004/10
Transmission Type: Manual Transmission
---------
Construction year from: 2004/11
Construction year to: 2006/11
Transmission Type: Manual Transmission
---------
Construction year from: 2006/12
Transmission Type: Manual Transmission
for PR number: F0A/F4F/F4G/F4J
for PR number: F4Q/F4X/F5G/F5X
for PR number: F6J/F6K/F6M/F6N
for PR number: F6P
To the price display, please log in
Art. No . : 16752
MAPCO 16752 DRIVE SHAFT
Manufacturer: MAPCO
Product Info:
- New Part
- Used part return not required
- Fitting Position: Front Axle Right
- Length: 795 mm
- Outer gearing wheel side: 36
- Seal Diameter: 59 mm
- Wheel-side joint diameter: 98 mm
- Transmission-side joint diameter: 108 mm
- Thread Size: M16x1.5
- Bore Ø: 10,5 mm
- Number of Bores: 6
- Bolt Hole Circle Ø: 94 mm
- Construction year from: 2004/11
Construction year to: 2006/11
Transmission Type: Manual Transmission
---------
Construction year from: 2006/12
Transmission Type: Manual Transmission
for PR number: F0A/F4F/F4G/F4J
for PR number: F4Q/F4X/F5G/F5X
for PR number: F6J/F6K/F6M/F6N
for PR number: F6P
To the price display, please log in
Art. No . : 16770
MAPCO 16770 DRIVE SHAFT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Outer gearing wheel side: 36
- Length: 482 mm
- Seal Diameter: 59,5 mm
- Wheel-side joint diameter: 98 mm
- Transmission-side joint diameter: 86 mm
- Thread Size: M16x1.5F
- Bore Ø: 10,2 mm
- Number of Bores: 6
- Bolt Hole Circle Ø: 100 mm
- Construction year to: 2006/11
Transmission Type: Automatic Transmission
---------
Construction year from: 2006/12
Transmission Type: Automatic Transmission
for PR number: F0A/F4F/F4G/F4J
for PR number: F4Q/F4X/F5G/F5X
for PR number: F6J/F6K/F6M/F6N
for PR number: F6P
To the price display, please log in
Art. No . : 16771
MAPCO 16771 DRIVE SHAFT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Right
- Outer gearing wheel side: 36
- Length: 753 mm
- Seal Diameter: 59,5 mm
- Wheel-side joint diameter: 98 mm
- Transmission-side joint diameter: 86 mm
- Thread Size: M16x1.5
- Bore Ø: 10,2 mm
- Number of Bores: 6
- Bolt Hole Circle Ø: 100 mm
- Construction year from: 2004/10
Transmission Type: Automatic Transmission
To the price display, please log in
EGR Valves (1)
Art. No . : 83807
MAPCO 83807 EGR VALVE
Manufacturer: MAPCO
Product Info:
- Operating Mode: Pneumatic
- Valve type: Diaphragm Valve
- Engine Code: BKD
To the price display, please log in
Engine & Gearbox Mountings (4)
Art. No . : 36945
MAPCO 36945 ENGINE MOUNT
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber-Metal Mount
- Fitting Position: Left
- Required quantity: 1
- Transmission Type: 6-Speed Dual-Clutch Transmission
To the price display, please log in
Art. No . : 36946
MAPCO 36946 ENGINE MOUNT
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber-Metal Mount
- Fitting Position: Left
- Required quantity: 1
- Transmission Type: 6-Speed Manual Transmission
To the price display, please log in
Art. No . : 37872
MAPCO 37872 ENGINE MOUNT
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber-Metal Mount
- Fitting Position: Lower
- Fitting Position: Rear
- Required quantity: 1
To the price display, please log in
Art. No . : 37873
MAPCO 37873 ENGINE MOUNT
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber-Metal Mount
- Fitting Position: Upper
- Fitting Position: Rear
- Outer diameter: 91 mm
- Required quantity: 1
To the price display, please log in
Engine Timing Components (2)
To the price display, please log in
Art. No . : 43854
MAPCO 43854 BELT PULLEY, CRANKSHAFT
Manufacturer: MAPCO
Product Info:
- Diameter: 143 mm
- Width: 42 mm
- Number of ribs: 6
To the price display, please log in
Exhaust Silencers & Mountings (36)
Art. No . : 30200
MAPCO 30200 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 42,0 mm
- Length: 94,0 mm
- Overall Length: 274,0 mm
- Supplementary Article/Info 2: with connecting pipe
- Specification: Interlock
To the price display, please log in
Art. No . : 30200/5
MAPCO 30200/5 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
To the price display, please log in
Art. No . : 30200/7
MAPCO 30200/7 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
To the price display, please log in
Art. No . : 30200/9
MAPCO 30200/9 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
To the price display, please log in
Art. No . : 30201
MAPCO 30201 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 42,0 mm
- Length: 269,0 mm
- Overall Length: 390,0 mm
- Supplementary Article/Info 2: with connecting pipe
- Specification: Interlock
To the price display, please log in
Art. No . : 30202
MAPCO 30202 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 45,0 mm
- Length: 100,0 mm
- Overall Length: 270,0 mm
- Supplementary Article/Info 2: with connecting pipe
- Specification: Interlock
To the price display, please log in
Art. No . : 30203
MAPCO 30203 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 45,0 mm
- Length: 150,0 mm
- Overall Length: 290,0 mm
- Supplementary Article/Info 2: with connecting pipe
- Specification: Interlock
To the price display, please log in
Art. No . : 30204
MAPCO 30204 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 45,0 mm
- Length: 190,0 mm
- Overall Length: 360,0 mm
- Supplementary Article/Info 2: with connecting pipe
- Specification: Interlock
To the price display, please log in
Art. No . : 30205
MAPCO 30205 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 45,0 mm
- Length: 240,0 mm
- Overall Length: 410,0 mm
- Supplementary Article/Info 2: with connecting pipe
- Specification: Interlock
To the price display, please log in
Art. No . : 30206
MAPCO 30206 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 50,0 mm
- Length: 250,0 mm
- Overall Length: 390,0 mm
- Supplementary Article/Info 2: with connecting pipe
- Specification: Interlock
To the price display, please log in
Art. No . : 30207
MAPCO 30207 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 48,0 mm
- Length: 100,0 mm
- Overall Length: 270,0 mm
- Supplementary Article/Info 2: with connecting pipe
- Specification: Interlock
To the price display, please log in
Art. No . : 30208
MAPCO 30208 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 50,0 mm
- Length: 100,0 mm
- Overall Length: 280,0 mm
- Supplementary Article/Info 2: with connecting pipe
- Specification: Interlock
To the price display, please log in
Art. No . : 30209
MAPCO 30209 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 50,0 mm
- Length: 190,0 mm
- Overall Length: 360,0 mm
- Supplementary Article/Info 2: with connecting pipe
- Specification: Interlock
To the price display, please log in
Art. No . : 30210
MAPCO 30210 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 52,0 mm
- Length: 150,0 mm
- Overall Length: 290,0 mm
- Supplementary Article/Info 2: with connecting pipe
- Specification: Interlock
To the price display, please log in
Art. No . : 30211
MAPCO 30211 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 55,0 mm
- Length: 105,0 mm
- Overall Length: 285,0 mm
- Supplementary Article/Info 2: with connecting pipe
- Specification: Interlock
To the price display, please log in
Art. No . : 30212
MAPCO 30212 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 55,0 mm
- Length: 195,0 mm
- Overall Length: 365,0 mm
- Supplementary Article/Info 2: with connecting pipe
- Specification: Interlock
To the price display, please log in
Art. No . : 30213
MAPCO 30213 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 52,0 mm
- Length: 105,0 mm
- Overall Length: 275,0 mm
- Supplementary Article/Info 2: with connecting pipe
- Specification: Interlock
To the price display, please log in
Art. No . : 30214
MAPCO 30214 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 60,0 mm
- Length: 120,0 mm
- Overall Length: 300,0 mm
- Supplementary Article/Info 2: with connecting pipe
- Specification: Interlock
To the price display, please log in
Art. No . : 30215
MAPCO 30215 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 50,0 mm
- Length: 100,0 mm
- Overall Length: 185,0 mm
- Supplementary Article/Info 2: with connecting pipe
- Specification: Interlock
To the price display, please log in
Art. No . : 30216
MAPCO 30216 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 45 mm
- Length: 100 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30217
MAPCO 30217 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 45 mm
- Length: 150 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30218
MAPCO 30218 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 45 mm
- Length: 200 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30219
MAPCO 30219 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 45 mm
- Length: 230 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30220
MAPCO 30220 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 50 mm
- Length: 100 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30221
MAPCO 30221 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 50 mm
- Length: 150 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30222
MAPCO 30222 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 50 mm
- Length: 200 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30223
MAPCO 30223 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 50 mm
- Length: 250 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30224
MAPCO 30224 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 55 mm
- Length: 150 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30225
MAPCO 30225 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 55 mm
- Length: 200 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30226
MAPCO 30226 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 55 mm
- Length: 280 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30227
MAPCO 30227 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 60 mm
- Length: 100 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30228
MAPCO 30228 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Specification: interlock
- Diameter: 60 mm
- Length: 150 mm
To the price display, please log in
Art. No . : 30230
MAPCO 30230 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter 1: 45,0 mm
- Diameter 2: 48,0 mm
- Diameter 3: 55,0 mm
- Length: 100 mm
- Overall Length: 400 mm
- Supplementary Article/Info 2: with connecting pipe
- Specification: Interlock
To the price display, please log in
Art. No . : 30232
MAPCO 30232 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Length: 100 mm
- Pipe Ø: 55,0 mm
- Material: Stainless Steel
- Specification: Interlock
- Specification: Soft
To the price display, please log in
Art. No . : 30233
MAPCO 30233 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 60 mm
- Length: 200 mm
- Specification: Interlock
- Supplementary Article/Info 2: without connecting pipe
- Material: Stainless Steel
- Specification: Soft
To the price display, please log in
Art. No . : 30234
MAPCO 30234 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 70 mm
- Length: 100 mm
- Material: Stainless Steel
- Specification: Interlock
- Specification: Soft
To the price display, please log in
Filter Set (6)
Art. No . : 68821
MAPCO 68821 FILTER SET
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Filter type: Charcoal Filter
- Multi-piece: Five-piece
- Chassis number from: 1T6045001
To the price display, please log in
Art. No . : 68827
MAPCO 68827 FILTER SET
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Filter type: Pollen Filter
- Multi-piece: Five-piece
- Chassis number from: 1T6045001
To the price display, please log in
Art. No . : 68828
MAPCO 68828 FILTER SET
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Filter type: Charcoal Filter
- Multi-piece: Three-piece
To the price display, please log in
Art. No . : 68906
MAPCO 68906 FILTER SET
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Supplementary Article/Supplementary Info: with air filter
- Multi-piece: Five-piece
- Chassis number to: 1T-6-045000
To the price display, please log in
Art. No . : 68907
MAPCO 68907 FILTER SET
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Multi-piece: Five-piece
- Supplementary Article/Supplementary Info: with oil drain plug
To the price display, please log in
Art. No . : 68922
MAPCO 68922 FILTER SET
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Multi-piece: Five-piece
To the price display, please log in
Filters & Filter Kits (20)
Art. No . : 29990
MAPCO 29990 HYDRAULIC FILTER, STEERING SYSTEM
Manufacturer: MAPCO
Product Info:
- New Part
- Manufacturer Restriction: Schutzfilter
- Vehicle Equipment: for vehicles with power steering
- Flange Ø: 10 mm
- Filter type: In-Line Filter
- Specification: Magnetfilter
To the price display, please log in
Art. No . : 29990/5
MAPCO 29990/5 HYDRAULIC FILTER, STEERING SYSTEM
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Manufacturer Restriction: Schutzfilter
- Vehicle Equipment: for vehicles with power steering
- Flange Ø: 10,0 mm
- Filter type: In-Line Filter
- Specification: Magnetfilter
To the price display, please log in
Art. No . : 29991
MAPCO 29991 HYDRAULIC FILTER, STEERING SYSTEM
Manufacturer: MAPCO
Product Info:
- New Part
- Flange Ø: 12,0 mm
- Filter type: In-Line Filter
- Specification: Magnetfilter
- Vehicle Equipment: for vehicles with power steering
To the price display, please log in
Art. No . : 29991/5
MAPCO 29991/5 HYDRAULIC FILTER, STEERING SYSTEM
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Manufacturer Restriction: Schutzfilter
- Flange Ø: 12,0 mm
- Filter type: In-Line Filter
- Specification: Magnetfilter
- Vehicle Equipment: for vehicles with power steering
To the price display, please log in
Art. No . : 60816
MAPCO 60816 AIR FILTER
Manufacturer: MAPCO
Product Info:
- Filter type: Filter Insert
- Length: 345 mm
- Width: 136 mm
- Height: 70 mm
To the price display, please log in
Art. No . : 63809
MAPCO 63809 FUEL FILTER
Manufacturer: MAPCO
Product Info:
- Filter type: Filter Insert
- Outer diameter: 78 mm
- Inner diameter: 12 mm
- Height: 136 mm
- Chassis number from: 1T6045001
To the price display, please log in
Art. No . : 63810
MAPCO 63810 FUEL FILTER
Manufacturer: MAPCO
Product Info:
- Filter type: Filter Insert
- Inner diameter: 12 mm
- Outer diameter: 83 mm
- Inner diameter 1: 38,5 mm
- Supplementary Article/Supplementary Info: with seal
- Height: 136 mm
- Chassis number to: 1T-6-045000
To the price display, please log in
Art. No . : 64806
MAPCO 64806 OIL FILTER
Manufacturer: MAPCO
Product Info:
- Filter type: Filter Insert
- Diameter 1: 70,5 mm
- Diameter 2: 33,3 mm
- Height: 140,5 mm
To the price display, please log in
Art. No . : 64806/10
MAPCO 64806/10 OIL FILTER
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Multi-piece: Multi-piece
- Filter type: Filter Insert
- Diameter 1: 70,5 mm
- Diameter 2: 33,3 mm
- Height: 140,5 mm
- Required quantity: 1
To the price display, please log in
Art. No . : 64806/5
MAPCO 64806/5 OIL FILTER
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Multi-piece: Multi-piece
To the price display, please log in
Art. No . : 65801
MAPCO 65801 FILTER, INTERIOR AIR
Manufacturer: MAPCO
Product Info:
- Filter type: Pollen Filter
- Length: 287 mm
- Width: 215 mm
- Height: 34 mm
To the price display, please log in
Art. No . : 67801
MAPCO 67801 FILTER, INTERIOR AIR
Manufacturer: MAPCO
Product Info:
- Filter type: Charcoal Filter
- Length: 287 mm
- Width: 215 mm
- Height: 34 mm
- Shape: Pentagonal
- Left-/right-hand drive vehicles: for left-hand drive vehicles
Vehicle Equipment: for vehicles with air conditioning
To the price display, please log in
Art. No . : 68821
MAPCO 68821 FILTER SET
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Filter type: Charcoal Filter
- Multi-piece: Five-piece
- Chassis number from: 1T6045001
To the price display, please log in
Art. No . : 68827
MAPCO 68827 FILTER SET
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Filter type: Pollen Filter
- Multi-piece: Five-piece
- Chassis number from: 1T6045001
To the price display, please log in
Art. No . : 68828
MAPCO 68828 FILTER SET
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Filter type: Charcoal Filter
- Multi-piece: Three-piece
To the price display, please log in
Art. No . : 68906
MAPCO 68906 FILTER SET
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Supplementary Article/Supplementary Info: with air filter
- Multi-piece: Five-piece
- Chassis number to: 1T-6-045000
To the price display, please log in
Art. No . : 68907
MAPCO 68907 FILTER SET
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Multi-piece: Five-piece
- Supplementary Article/Supplementary Info: with oil drain plug
To the price display, please log in
Art. No . : 68922
MAPCO 68922 FILTER SET
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Multi-piece: Five-piece
To the price display, please log in
Art. No . : 69006
MAPCO 69006 HYDRAULIC FILTER SET, AUTOMATIC TRANSMISSION
Manufacturer: MAPCO
Product Info:
- Transmission Type: 09G
- Transmission Type: 6-Speed Automatic Transmission
- Supplementary Article/Supplementary Info: with seal
To the price display, please log in
Art. No . : 69022
MAPCO 69022 HYDRAULIC FILTER, AUTOMATIC TRANSMISSION
Manufacturer: MAPCO
Product Info:
- Transmission Type: DQ250
- Transmission Type: 6-Speed Automatic Transmission
- Transmission Type: Dual-Clutch Transmission
- Vehicle Equipment: for vehicles with direct shift transmission
- Model year to: 2004
To the price display, please log in
Fuel Filter (2)
Art. No . : 63809
MAPCO 63809 FUEL FILTER
Manufacturer: MAPCO
Product Info:
- Filter type: Filter Insert
- Outer diameter: 78 mm
- Inner diameter: 12 mm
- Height: 136 mm
- Chassis number from: 1T6045001
To the price display, please log in
Art. No . : 63810
MAPCO 63810 FUEL FILTER
Manufacturer: MAPCO
Product Info:
- Filter type: Filter Insert
- Inner diameter: 12 mm
- Outer diameter: 83 mm
- Inner diameter 1: 38,5 mm
- Supplementary Article/Supplementary Info: with seal
- Height: 136 mm
- Chassis number to: 1T-6-045000
To the price display, please log in
Fuel Pumps (1)
Art. No . : 22869
MAPCO 22869 FUEL PUMP
Manufacturer: MAPCO
Product Info:
- Operating Mode: Electric
- Pressure: 0,5 bar
- Fuel Type: Diesel
- Chassis number to: 1T-4-074 111
To the price display, please log in
Gas Spring Bonnet (1)
Art. No . : 91767
MAPCO 91767 GAS SPRING, BONNET
Manufacturer: MAPCO
Product Info:
- Fitting Position: Left
- Piston conrod diameter: 8 mm
- Housing Diameter: 18 mm
- Length: 405 mm
- Stroke: 165 mm
- Eject Force: 460 N
- Required quantity: 1
To the price display, please log in
Gas Springs Cargo Area (2)
Art. No . : 91824
MAPCO 91824 GAS SPRING, BOOT-/CARGO AREA
Manufacturer: MAPCO
Product Info:
- Length: 505 mm
- Diameter 1: 8 mm
- Housing Diameter: 19,0 mm
- Mounting points diameter: 25 mm
- Stroke: 160,0 mm
- Eject Force: 770 N
- Replace in pairs only
- Construction year to: 2006/12
To the price display, please log in
Art. No . : 91824/2
MAPCO 91824/2 GAS SPRING, BOOT-/CARGO AREA
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Length: 505 mm
- Diameter 1: 8 mm
- Housing Diameter: 18,5 mm
- Eject Force: 770 N
- Stroke: 155 mm
- Mounting points diameter: 25 mm
- Bore Ø 2: 26 mm
- Required quantity: 1
To the price display, please log in
Glow Plugs (1)
Art. No . : 7809
MAPCO 7809 GLOW PLUG
Manufacturer: MAPCO
Product Info:
- Voltage: 4,4 V
- Connector type: 4 mm
- Cone Pitch: 93
- Thread Size: M8x1,0
- Overall Length: 117 mm
- Fuel Mixture Formation: Unit Injector System (UIS)
- Spanner Size: 8 mm
- Tightening Torque: 10 Nm
- Rated Current: 25 A
- Glow Plug Design: after-glow capable
- Glow Plug Design: Pencil-type Glow Plug
- Fitting Depth: 30 mm
- Failure Moment: 20 Nm
- Engine Code: BKD
Required quantity: 4
To the price display, please log in
HPS Brake Pads (1)
Art. No . : 6695HPS
MAPCO 6695HPS BRAKE PAD SET, DISC BRAKE
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Fitting Position: Front Axle
- Brake System: ATE
- Width 1: 155,1 mm
- Height 1: 66 mm
- Width 2: 156,3 mm
- Height 2: 71,3 mm
- Thickness: 20,6 mm
- Wear Warning Contact: incl. wear warning contact
- Number of wear indicators: 1 per axle
- Warning Contact Length: 155 mm
- for PR number: 1ZD
1ZE
1ZP
for PR number: 1ZA
1LJ
To the price display, please log in
HPS Carbon Brake Kits (4)
Art. No . : 47830HPS
MAPCO 47830HPS BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Fitting Position: Front Axle
- Surface: Coated
- Brake Disc Type: Vented
- Outer diameter: 288 mm
- Brake Disc Thickness: 25 mm
- Minimum thickness: 22 mm
- Height: 49,9 mm
- Inner diameter: 144 mm
- Bore Ø: 15,3 mm
- Number of Holes: 5
- No. of holes 2: 9
- Bolt Hole Circle Ø: 112 mm
- Centering Diameter: 65 mm
- Machining: High-carbon
- Brake System: ATE
- Width 1: 155,1 mm
- Height 1: 66 mm
- Brake Disc Thickness: 20,6 mm
- Wear Warning Contact: incl. wear warning contact
- Warning Contact Length: 155 mm
- Number of wear indicators: 1 per axle
To the price display, please log in
Art. No . : 47830HPS
MAPCO 47830HPS BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Fitting Position: Front Axle
- Surface: Coated
- Brake Disc Type: Vented
- Outer diameter: 288 mm
- Brake Disc Thickness: 25 mm
- Minimum thickness: 22 mm
- Height: 49,9 mm
- Inner diameter: 144 mm
- Bore Ø: 15,3 mm
- Number of Holes: 5
- No. of holes 2: 9
- Bolt Hole Circle Ø: 112 mm
- Centering Diameter: 65 mm
- Machining: High-carbon
- Brake System: ATE
- Width 1: 155,1 mm
- Height 1: 66 mm
- Brake Disc Thickness: 20,6 mm
- Wear Warning Contact: incl. wear warning contact
- Warning Contact Length: 155 mm
- Number of wear indicators: 1 per axle
To the price display, please log in
Art. No . : 47833HPS
MAPCO 47833HPS BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Fitting Position: Front Axle
- Quantity Unit: Kit
- Multi-piece: Multi-piece
- Machining: High-carbon
- Surface: Coated
- Brake System: ATE
- Brake Disc Type: Vented
- Outer diameter: 312 mm
- Brake Disc Thickness: 25 mm
- Number of Holes: 5
- Wear Warning Contact: incl. wear warning contact
- Number of wear indicators: 1 per axle
- Supplementary Article/Info 2: with anti-squeak plate
- Required quantity: 1
To the price display, please log in
Art. No . : 47833HPS
MAPCO 47833HPS BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Fitting Position: Front Axle
- Quantity Unit: Kit
- Multi-piece: Multi-piece
- Machining: High-carbon
- Surface: Coated
- Brake System: ATE
- Brake Disc Type: Vented
- Outer diameter: 312 mm
- Brake Disc Thickness: 25 mm
- Number of Holes: 5
- Wear Warning Contact: incl. wear warning contact
- Number of wear indicators: 1 per axle
- Supplementary Article/Info 2: with anti-squeak plate
- Required quantity: 1
To the price display, please log in
Art. No . : 47837HPS
MAPCO 47837HPS BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Brake System: Lucas / TRW
- Brake Disc Type: Solid
- Fitting Position: Rear Axle
- Surface: Coated
- Outer diameter: 256 mm
- Brake Disc Thickness: 12 mm
- Minimum thickness: 10 mm
- Height: 48,6 mm
- Inner diameter: 140 mm
- Bore Ø: 15,3 mm
- Number of Holes: 5
- No. of holes 2: 9
- Bolt Hole Circle Ø: 112 mm
- Centering Diameter: 65 mm
- Machining: High-carbon
- Width: 105,3 mm
- Brake Disc Thickness: 17,1 mm
- Wear Warning Contact: prepared for wear indicator
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article/Supplementary Info: with accessories
- Supplementary Article/Info 2: with brake caliper screws
- Number of screws: 4
To the price display, please log in
Art. No . : 47837HPS
MAPCO 47837HPS BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Brake System: Lucas / TRW
- Brake Disc Type: Solid
- Fitting Position: Rear Axle
- Surface: Coated
- Outer diameter: 256 mm
- Brake Disc Thickness: 12 mm
- Minimum thickness: 10 mm
- Height: 48,6 mm
- Inner diameter: 140 mm
- Bore Ø: 15,3 mm
- Number of Holes: 5
- No. of holes 2: 9
- Bolt Hole Circle Ø: 112 mm
- Centering Diameter: 65 mm
- Machining: High-carbon
- Width: 105,3 mm
- Brake Disc Thickness: 17,1 mm
- Wear Warning Contact: prepared for wear indicator
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article/Supplementary Info: with accessories
- Supplementary Article/Info 2: with brake caliper screws
- Number of screws: 4
To the price display, please log in
Art. No . : 47841HPS
MAPCO 47841HPS BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Fitting Position: Rear Axle
- Surface: Coated
- Brake Disc Type: Solid
- Supplementary Article/Info 2: with screws
- Outer diameter: 282 mm
- Brake Disc Thickness: 12 mm
- Minimum thickness: 10 mm
- Height: 48,6 mm
- Inner diameter: 159 mm
- Bore Ø: 15,3 mm
- Number of Holes: 5
- No. of holes 2: 9
- Bolt Hole Circle Ø: 112 mm
- Centering Diameter: 65 mm
- Brake System: Lucas / TRW
- Width: 105,3 mm
- Brake Disc Thickness: 17,1 mm
- Wear Warning Contact: prepared for wear indicator
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article/Supplementary Info: with accessories
- Supplementary Article/Info 2: with brake caliper screws
- Number of screws: 4
- for PR number: 1KJ
To the price display, please log in
Art. No . : 47841HPS
MAPCO 47841HPS BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Fitting Position: Rear Axle
- Surface: Coated
- Brake Disc Type: Solid
- Supplementary Article/Info 2: with screws
- Outer diameter: 282 mm
- Brake Disc Thickness: 12 mm
- Minimum thickness: 10 mm
- Height: 48,6 mm
- Inner diameter: 159 mm
- Bore Ø: 15,3 mm
- Number of Holes: 5
- No. of holes 2: 9
- Bolt Hole Circle Ø: 112 mm
- Centering Diameter: 65 mm
- Brake System: Lucas / TRW
- Width: 105,3 mm
- Brake Disc Thickness: 17,1 mm
- Wear Warning Contact: prepared for wear indicator
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article/Supplementary Info: with accessories
- Supplementary Article/Info 2: with brake caliper screws
- Number of screws: 4
- for PR number: 1KJ
To the price display, please log in
HPS Coupling Rod Kits (2)
Art. No . : 53825HPS
MAPCO 53825HPS REPAIR KIT, STABILIZER COUPLING ROD
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Rod/Strut: Coupling Rod
- Quantity Unit: Kit
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Length: 335 mm
- Outer thread: M12x1,75 mm
- Required quantity: 1
To the price display, please log in
Art. No . : 53829HPS
MAPCO 53829HPS REPAIR KIT, STABILIZER COUPLING ROD
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Rod/Strut: Coupling Rod
- Quantity Unit: Kit
- Fitting Position: Rear Axle Left
- Fitting Position: Rear Axle Right
- Required quantity: 1
To the price display, please log in
HPS Coupling Rods (3)
Art. No . : 51825HPS
MAPCO 51825HPS ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Rod/Strut: Coupling Rod
- Fitting Position: Front Axle left and right
- Length: 335 mm
- Outer thread: M12x1,75 mm
- Required quantity: 2
To the price display, please log in
Art. No . : 51829/1HPS
MAPCO 51829/1HPS ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Rod/Strut: Coupling Rod
- Fitting Position: Rear Axle left and right
- Supplementary Article/Info 2: with screw
- Supplementary Article/Info 2: with nut
- Length: 95 mm
- Inner diameter: 10 mm
- Outer thread: M10x1,5 mm
- Required quantity: 2
To the price display, please log in
Art. No . : 51829HPS
MAPCO 51829HPS ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Rod/Strut: Coupling Rod
- Fitting Position: Rear Axle left and right
- Inner diameter: 10 mm
- Outer thread: M10x1,5 mm
- Length: 96,0 mm
- Required quantity: 2
To the price display, please log in
HPS Wiper Blades (4)
Art. No . : 104600HPS
MAPCO 104600HPS WIPER BLADE
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Quantity Unit: Piece
- Wiper blade type: Hybrid Wiper Blade
- Length: 600 mm
- Length: 24 in
- Construction year from: 2006/11
Number of Doors: 5
Fitting Position: Driver side
To the price display, please log in
Art. No . : 104700/2HPS
MAPCO 104700/2HPS WIPER BLADE
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Quantity Unit: Set
- Wiper blade type: Hybrid Wiper Blade
- Fitting Position: Front
- Length 1: 700 mm
- Length 2: 700 mm
- Required quantity: 1
- Vehicle Equipment: for vehicles with counter-directional wiper arms
To the price display, please log in
Art. No . : 104700HPS
MAPCO 104700HPS WIPER BLADE
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Quantity Unit: Piece
- Wiper blade type: Hybrid Wiper Blade
- Length: 700 mm
- Required quantity: 1
- Fitting Position: Driver side
To the price display, please log in
Art. No . : 104726HPS
MAPCO 104726HPS WIPER BLADE
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Quantity Unit: Set
- Wiper blade type: Hybrid Wiper Blade
- Length 1: 600 mm
- Length 2: 475 mm
- Required quantity: 1
- Construction year from: 2006/11
Fitting Position: Left and right
Number of Doors: 5
To the price display, please log in
Hydraulic Filters (6)
Art. No . : 29990
MAPCO 29990 HYDRAULIC FILTER, STEERING SYSTEM
Manufacturer: MAPCO
Product Info:
- New Part
- Manufacturer Restriction: Schutzfilter
- Vehicle Equipment: for vehicles with power steering
- Flange Ø: 10 mm
- Filter type: In-Line Filter
- Specification: Magnetfilter
To the price display, please log in
Art. No . : 29990/5
MAPCO 29990/5 HYDRAULIC FILTER, STEERING SYSTEM
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Manufacturer Restriction: Schutzfilter
- Vehicle Equipment: for vehicles with power steering
- Flange Ø: 10,0 mm
- Filter type: In-Line Filter
- Specification: Magnetfilter
To the price display, please log in
Art. No . : 29991
MAPCO 29991 HYDRAULIC FILTER, STEERING SYSTEM
Manufacturer: MAPCO
Product Info:
- New Part
- Flange Ø: 12,0 mm
- Filter type: In-Line Filter
- Specification: Magnetfilter
- Vehicle Equipment: for vehicles with power steering
To the price display, please log in
Art. No . : 29991/5
MAPCO 29991/5 HYDRAULIC FILTER, STEERING SYSTEM
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Manufacturer Restriction: Schutzfilter
- Flange Ø: 12,0 mm
- Filter type: In-Line Filter
- Specification: Magnetfilter
- Vehicle Equipment: for vehicles with power steering
To the price display, please log in
Art. No . : 69006
MAPCO 69006 HYDRAULIC FILTER SET, AUTOMATIC TRANSMISSION
Manufacturer: MAPCO
Product Info:
- Transmission Type: 09G
- Transmission Type: 6-Speed Automatic Transmission
- Supplementary Article/Supplementary Info: with seal
To the price display, please log in
Art. No . : 69022
MAPCO 69022 HYDRAULIC FILTER, AUTOMATIC TRANSMISSION
Manufacturer: MAPCO
Product Info:
- Transmission Type: DQ250
- Transmission Type: 6-Speed Automatic Transmission
- Transmission Type: Dual-Clutch Transmission
- Vehicle Equipment: for vehicles with direct shift transmission
- Model year to: 2004
To the price display, please log in
Interior Filter (2)
Art. No . : 65801
MAPCO 65801 FILTER, INTERIOR AIR
Manufacturer: MAPCO
Product Info:
- Filter type: Pollen Filter
- Length: 287 mm
- Width: 215 mm
- Height: 34 mm
To the price display, please log in
Art. No . : 67801
MAPCO 67801 FILTER, INTERIOR AIR
Manufacturer: MAPCO
Product Info:
- Filter type: Charcoal Filter
- Length: 287 mm
- Width: 215 mm
- Height: 34 mm
- Shape: Pentagonal
- Left-/right-hand drive vehicles: for left-hand drive vehicles
Vehicle Equipment: for vehicles with air conditioning
To the price display, please log in
Joint Kit Drive Shaft (8)
Art. No . : 16863
MAPCO 16863 JOINT KIT, DRIVE SHAFT
Manufacturer: MAPCO
Product Info:
- Outer gearing wheel side: 36
- Internal Teeth, wheel side: 27
- Seal Diameter: 59,5 mm
- Outer diameter: 97,95 mm
- Construction year to: 2006/11
Fitting Position: Wheel Side
---------
Fitting Position: Front Axle Left
---------
Fitting Position: Front Axle Right
---------
Construction year from: 2006/12
for PR number: F0A/F4F/F4G/F4J
---------
for PR number: F4Q/F4X/F5G/F5X
---------
for PR number: F6J/F6K/F6M/F6N
---------
for PR number: F6P
To the price display, please log in
Art. No . : 18978
MAPCO 18978 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- Reinforced Version
- Quality: Für PKW
To the price display, please log in
Art. No . : 18979
MAPCO 18979 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- Reinforced Version
- Number of Parts: 4 parts
- Quality: für Transporter
To the price display, please log in
Art. No . : 18990
MAPCO 18990 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- Inner diameter 2 of: 55 mm
- Inner diameter 2 to: 90 mm
- Manufacturer Restriction: für PKW
To the price display, please log in
Art. No . : 18990/2
MAPCO 18990/2 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- Supplementary Article/Info 2: with clamps
To the price display, please log in
Art. No . : 18990/3
MAPCO 18990/3 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
To the price display, please log in
Art. No . : 18990/6
MAPCO 18990/6 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Multi-piece: Multi-piece
- Supplementary Article/Info 2: with clamps
To the price display, please log in
Art. No . : 18991
MAPCO 18991 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- Inner diameter 2 of: 90 mm
- Inner diameter 2 to: 120 mm
- Manufacturer Restriction: für Transporter
To the price display, please log in
Oil Filter (3)
Art. No . : 64806
MAPCO 64806 OIL FILTER
Manufacturer: MAPCO
Product Info:
- Filter type: Filter Insert
- Diameter 1: 70,5 mm
- Diameter 2: 33,3 mm
- Height: 140,5 mm
To the price display, please log in
Art. No . : 64806/10
MAPCO 64806/10 OIL FILTER
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Multi-piece: Multi-piece
- Filter type: Filter Insert
- Diameter 1: 70,5 mm
- Diameter 2: 33,3 mm
- Height: 140,5 mm
- Required quantity: 1
To the price display, please log in
Art. No . : 64806/5
MAPCO 64806/5 OIL FILTER
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Multi-piece: Multi-piece
To the price display, please log in
Repair Kit Stabilizer Suspension (1)
Art. No . : 53822HPS
MAPCO 53822HPS REPAIR KIT, STABILIZER SUSPENSION
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Mounting Type: Rubber Bush
- Quantity Unit: Kit
- Fitting Position: Rear Axle left and right
- Inner diameter: 21.5 mm
- Supplementary Article/Info 2: with coupling rod
- Required quantity: 1
To the price display, please log in
Rod Strut Stabiliser (6)
Art. No . : 51825HPS
MAPCO 51825HPS ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Rod/Strut: Coupling Rod
- Fitting Position: Front Axle left and right
- Length: 335 mm
- Outer thread: M12x1,75 mm
- Required quantity: 2
To the price display, please log in
Art. No . : 51829/1HPS
MAPCO 51829/1HPS ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Rod/Strut: Coupling Rod
- Fitting Position: Rear Axle left and right
- Supplementary Article/Info 2: with screw
- Supplementary Article/Info 2: with nut
- Length: 95 mm
- Inner diameter: 10 mm
- Outer thread: M10x1,5 mm
- Required quantity: 2
To the price display, please log in
Art. No . : 51829HPS
MAPCO 51829HPS ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Rod/Strut: Coupling Rod
- Fitting Position: Rear Axle left and right
- Inner diameter: 10 mm
- Outer thread: M10x1,5 mm
- Length: 96,0 mm
- Required quantity: 2
To the price display, please log in
Art. No . : 53825/5HPS
MAPCO 53825/5HPS REPAIR KIT, STABILIZER COUPLING ROD
Manufacturer: MAPCO
Product Info:
- Rod/Strut: Coupling Rod
- Quantity Unit: Kit
- Fitting Position: Front Axle left and right
- Length: 290 mm
- Outer thread: M12x1,75 mm
- Required quantity: 1
- Quality: HPS standard
To the price display, please log in
Art. No . : 53825HPS
MAPCO 53825HPS REPAIR KIT, STABILIZER COUPLING ROD
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Rod/Strut: Coupling Rod
- Quantity Unit: Kit
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Length: 335 mm
- Outer thread: M12x1,75 mm
- Required quantity: 1
To the price display, please log in
Art. No . : 53829HPS
MAPCO 53829HPS REPAIR KIT, STABILIZER COUPLING ROD
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Rod/Strut: Coupling Rod
- Quantity Unit: Kit
- Fitting Position: Rear Axle Left
- Fitting Position: Rear Axle Right
- Required quantity: 1
To the price display, please log in
Rubber Pad Trolley Jack & Lifting Platforms (1)
Art. No . : 39999
MAPCO 39999 SUPPORT PLATE, MOBILE JACK
Manufacturer: MAPCO
Product Info:
- Material: Elastomer
To the price display, please log in
Screw Nuts Small Parts (1)
Art. No . : 26754/9
MAPCO 26754/9 SCREW
Manufacturer: MAPCO
Product Info:
- Length: 72 mm
- Outer thread: M16 x 1,5 mm
- Quality/ Grade: 8.8
- Spanner Size: 17
- Bolt Head-/Nut Design: Female Hex
- Fitting Position: Front Axle
To the price display, please log in
Sealing Plug Oil Sump & Kits (3)
Art. No . : 95954
MAPCO 95954 SEALING PLUG, OIL SUMP
Manufacturer: MAPCO
Product Info:
- Length: 29,5 mm
- Thread Length: 18 mm
- Outer thread: M14 x 1,5 mm
- Spanner Size: 19
- Supplementary Article/Info 2: with seal ring
To the price display, please log in
Art. No . : 95954/10
MAPCO 95954/10 SEALING PLUG, OIL SUMP
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Multi-piece: Multi-piece
To the price display, please log in
Art. No . : 95954/5
MAPCO 95954/5 SEALING PLUG, OIL SUMP
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Multi-piece: Five-piece
- Supplementary Article/Info 2: with seal ring
To the price display, please log in
Sensor Coolant Temperature (1)
Art. No . : 88800
MAPCO 88800 SENDER UNIT, COOLANT TEMPERATURE
Manufacturer: MAPCO
Product Info:
- Housing Diameter: 20,0 mm
- Colour: Grey
- Number of connectors: 2,0
To the price display, please log in
Sensor Parking Assist (10)
Art. No . : 88752
MAPCO 88752 SENSOR, PARKING ASSIST
Manufacturer: MAPCO
Product Info:
- Sensor Type: Ultrasonic Sensor
- Chemical Properties: Over-paintable
- Number of Poles: 3
- Fitting Position: Front
- Fitting Position: Lateral Installation
- Construction year from: 2007/03
To the price display, please log in
Art. No . : 88752/2
MAPCO 88752/2 SENSOR, PARKING ASSIST
Manufacturer: MAPCO
Product Info:
- Required quantity: 1
- Construction year from: 2007/03
To the price display, please log in
Art. No . : 88753
MAPCO 88753 SENSOR, PARKING ASSIST
Manufacturer: MAPCO
Product Info:
- Sensor Type: Ultrasonic Sensor
- Chemical Properties: Paintable
- Number of Poles: 3
To the price display, please log in
Art. No . : 88753/2
MAPCO 88753/2 SENSOR, PARKING ASSIST
Manufacturer: MAPCO
Product Info:
- Required quantity: 1
To the price display, please log in
Art. No . : 88754
MAPCO 88754 SENSOR, PARKING ASSIST
Manufacturer: MAPCO
Product Info:
- Sensor Type: Ultrasonic Sensor
- Chemical Properties: Over-paintable
- Number of connectors: 3
- Fitting Position: Front
- Fitting Position: Rear
To the price display, please log in
Art. No . : 88754/2
MAPCO 88754/2 SENSOR, PARKING ASSIST
Manufacturer: MAPCO
Product Info:
- Required quantity: 1
To the price display, please log in
Art. No . : 88754/4
MAPCO 88754/4 SENSOR, PARKING ASSIST
Manufacturer: MAPCO
Product Info:
- Required quantity: 1
To the price display, please log in
Art. No . : 88758
MAPCO 88758 SENSOR, PARKING ASSIST
Manufacturer: MAPCO
Product Info:
- Sensor Type: Ultrasonic Sensor
- Chemical Properties: Over-paintable
- Number of Poles: 3
- Fitting Position: Rear
- Construction year from: 2007/05
To the price display, please log in
Art. No . : 88758/4
MAPCO 88758/4 SENSOR, PARKING ASSIST
Manufacturer: MAPCO
Product Info:
- Required quantity: 1
- Construction year from: 2007/05
To the price display, please log in
Art. No . : 88761
MAPCO 88761 SENSOR, PARKING ASSIST
Manufacturer: MAPCO
Product Info:
- Sensor Type: Ultrasonic Sensor
- Chemical Properties: Paintable
- Number of Poles: 3
- Fitting Position: Front
- Fitting Position: inner
- Construction year from: 2007/03
To the price display, please log in
Shock Absorbers (7)
Art. No . : 20768
MAPCO 20768 SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Shock Absorber Type: Gas Pressure
- Fitting Position: Rear Axle
- Shock Absorber Design: Suspension Strut
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Shock Absorber Mounting Type: Bottom eye
- Required quantity: 2
- Replace in pairs only
- Suspension: for vehicles without sports suspension
Suspension: for vehicles without off-road suspension
To the price display, please log in
Art. No . : 20814
MAPCO 20814 SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Shock Absorber Type: Gas Pressure
- Fitting Position: Front Axle
- Housing Diameter in Clamping Area: 55 mm
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Replace in pairs only
- Required quantity: 2
- Suspension: for vehicles without sports suspension
Suspension: for vehicles without off-road suspension
To the price display, please log in
Art. No . : 20814/2
MAPCO 20814/2 SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Shock Absorber Type: Gas Pressure
- Fitting Position: Front Axle
- Housing Diameter in Clamping Area: 55 mm
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Required quantity: 1
- Suspension: for vehicles without sports suspension
Suspension: for vehicles without off-road suspension
To the price display, please log in
Art. No . : 20817
MAPCO 20817 SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Shock Absorber Type: Gas Pressure
- Fitting Position: Rear Axle
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Shock Absorber Mounting Type: Bottom eye
- Replace in pairs only
- Suspension: for vehicles with standard suspension
To the price display, please log in
Art. No . : 20817/2
MAPCO 20817/2 SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Shock Absorber Type: Gas Pressure
- Quantity Unit: Kit
- Fitting Position: Rear Axle
- Shock Absorber Design: Suspension Strut Insert
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Shock Absorber Mounting Type: Bottom eye
- Required quantity: 1
- Suspension: for vehicles with standard suspension
Suspension: for vehicles without off-road suspension
To the price display, please log in
Art. No . : 40909
MAPCO 40909 MOUNTING KIT, SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Shock Absorber Type: Gas Pressure
- Fitting Position: Front Axle
- Shock Absorber Design: Suspension Strut
- Shock Absorber System: Twin-Tube
- Diameter: 55 mm
- Supplementary Article/Info 2: with suspension strut support bearing
- Supplementary Article/Info 2: with anti-friction bearing
- Supplementary Article/Info 2: with protective cap/bellow
- Required quantity: 1
- Suspension: for vehicles without sports suspension
Suspension: for vehicles without off-road suspension
To the price display, please log in
Art. No . : 40968
MAPCO 40968 SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Shock Absorber Type: Gas Pressure
- Quantity Unit: Kit
- Fitting Position: Rear Axle Left
- Fitting Position: Rear Axle Right
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Shock Absorber Mounting Type: Bottom eye
- Supplementary Article/Info 2: with suspension strut support bearing
- Supplementary Article/Info 2: with protective cap/bellow
- Required quantity: 1
- Suspension: for vehicles without sports suspension
Suspension: for vehicles without off-road suspension
To the price display, please log in
Spring Repair Kit Drum Brakes (2)
Art. No . : 9310
MAPCO 9310 ACCESSORY KIT, DISC BRAKE PADS
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Brake System: LUCAS
- Brake Type: Disc Brake
- Multi-piece: Multi-piece
- Inner diameter: 18 mm
To the price display, please log in
Art. No . : 9607
MAPCO 9607 ACCESSORY KIT, DISC BRAKE PADS
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle
- Brake System: ATE
- Multi-piece: Two-piece
- for PR number: 1LJ
1ZA
1ZD
To the price display, please log in
Starter (2)
Art. No . : 13261
MAPCO 13261 STARTER
Manufacturer: MAPCO
Product Info:
- Voltage: 12 V
- Rated Power: 2,0 kW
- Number of Teeth: 11
To the price display, please log in
Art. No . : 13980
MAPCO 13980 STARTER
Manufacturer: MAPCO
Product Info:
- Used part return not required
- Voltage: 12,0 V
- Rated Power: 1,7 kW
- Number of Teeth: 10
- Rotation Direction: Anticlockwise rotation
- Flange Ø: 76,0 mm
- Position / Degree: links 42
- Number of mounting bores: 2
- Bore Ø: 12,5 mm
- Plug Type ID: 30, 50
To the price display, please log in
Starters Alternators (2)
Art. No . : 13261
MAPCO 13261 STARTER
Manufacturer: MAPCO
Product Info:
- Voltage: 12 V
- Rated Power: 2,0 kW
- Number of Teeth: 11
To the price display, please log in
Art. No . : 13980
MAPCO 13980 STARTER
Manufacturer: MAPCO
Product Info:
- Used part return not required
- Voltage: 12,0 V
- Rated Power: 1,7 kW
- Number of Teeth: 10
- Rotation Direction: Anticlockwise rotation
- Flange Ø: 76,0 mm
- Position / Degree: links 42
- Number of mounting bores: 2
- Bore Ø: 12,5 mm
- Plug Type ID: 30, 50
To the price display, please log in
Steering & Suspension Parts (41)
Art. No . : 51723
MAPCO 51723 INNER TIE ROD END
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle left and right
- Axle Joint Length: 329 mm
- Outer thread: M16x1,5 mm
- Required quantity: 2
To the price display, please log in
Art. No . : 51724
MAPCO 51724 BALL JOINT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Fitting Position: Lower
- Outer thread: M12x1,5 mm
- Cone Size: 15,3 mm
- Supplementary Article/Info 2: with fastening material
- Paired article numbers: 51725
- Required quantity: 1
To the price display, please log in
Art. No . : 51725
MAPCO 51725 BALL JOINT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Right
- Fitting Position: Lower
- Outer thread: M12x1,5 mm
- Cone Size: 15,3 mm
- Supplementary Article/Info 2: with fastening material
- Paired article numbers: 51724
- Required quantity: 1
To the price display, please log in
Art. No . : 51726
MAPCO 51726 CONTROL ARM
Manufacturer: MAPCO
Product Info:
- Steering arm type: Control Arm
- Material: Cast Steel
- Fitting Position: Front Axle Left
- Fitting Position: Lower
- Paired article numbers: 51727
- Required quantity: 1
- Chassis number to: 1T-6-070 000
To the price display, please log in
Art. No . : 51726/1
MAPCO 51726/1 CONTROL ARM
Manufacturer: MAPCO
Product Info:
- Steering arm type: Control Arm
- Supplementary Article/Info 2: with ball joint
- Fitting Position: Front Axle Left
- Fitting Position: Lower
- Paired article numbers: 51727/1
- Required quantity: 1
- Chassis number to: 1T-6-070 000
To the price display, please log in
Art. No . : 51727
MAPCO 51727 CONTROL ARM
Manufacturer: MAPCO
Product Info:
- Steering arm type: Control Arm
- Material: Cast Steel
- Fitting Position: Front Axle Right
- Fitting Position: Lower
- Paired article numbers: 51726
- Required quantity: 1
- Chassis number to: 1T-6-070 000
To the price display, please log in
Art. No . : 51727/1
MAPCO 51727/1 CONTROL ARM
Manufacturer: MAPCO
Product Info:
- Steering arm type: Control Arm
- Supplementary Article/Info 2: with ball joint
- Fitting Position: Front Axle Right
- Fitting Position: Lower
- Paired article numbers: 51726/1
- Required quantity: 1
- Chassis number to: 1T-6-070 000
To the price display, please log in
Art. No . : 51728
MAPCO 51728 ROD ASSEMBLY
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Paired article numbers: 51729
- Required quantity: 1
To the price display, please log in
Art. No . : 51729
MAPCO 51729 ROD ASSEMBLY
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Right
- Paired article numbers: 51728
- Required quantity: 1
To the price display, please log in
Art. No . : 51740
MAPCO 51740 TIE ROD END
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Inner thread: M16x1,5 mm
- Cone Size: 13,2 mm
- Required quantity: 1
- Paired article numbers: 51741
To the price display, please log in
Art. No . : 51741
MAPCO 51741 TIE ROD END
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Right
- Inner thread: M16x1,5 mm
- Cone Size: 13,2 mm
- Required quantity: 1
- Paired article numbers: 51740
To the price display, please log in
Art. No . : 51825HPS
MAPCO 51825HPS ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Rod/Strut: Coupling Rod
- Fitting Position: Front Axle left and right
- Length: 335 mm
- Outer thread: M12x1,75 mm
- Required quantity: 2
To the price display, please log in
Art. No . : 51826
MAPCO 51826 TIE ROD END
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Length: 94,0 mm
- Inner thread: M16x1,5 mm
- Outer thread: M12x1,5 mm
- Cone Size: 13,2 mm
- Paired article numbers: 51827
- Required quantity: 1
To the price display, please log in
Art. No . : 51827
MAPCO 51827 TIE ROD END
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Right
- Length: 94,0 mm
- Inner thread: M16x1,5 mm
- Outer thread: M12x1,5 mm
- Cone Size: 13,2 mm
- Paired article numbers: 51826
- Required quantity: 1
To the price display, please log in
Art. No . : 51829/1HPS
MAPCO 51829/1HPS ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Rod/Strut: Coupling Rod
- Fitting Position: Rear Axle left and right
- Supplementary Article/Info 2: with screw
- Supplementary Article/Info 2: with nut
- Length: 95 mm
- Inner diameter: 10 mm
- Outer thread: M10x1,5 mm
- Required quantity: 2
To the price display, please log in
Art. No . : 51829HPS
MAPCO 51829HPS ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Rod/Strut: Coupling Rod
- Fitting Position: Rear Axle left and right
- Inner diameter: 10 mm
- Outer thread: M10x1,5 mm
- Length: 96,0 mm
- Required quantity: 2
To the price display, please log in
Art. No . : 52718
MAPCO 52718 CONTROL ARM
Manufacturer: MAPCO
Product Info:
- Steering arm type: Control Arm
- Material: Metal
- Fitting Position: Rear Axle left and right
- Fitting Position: Upper
- Length: 305 mm
- Required quantity: 2
To the price display, please log in
Art. No . : 52718/2HPS
MAPCO 52718/2HPS LINK SET, WHEEL SUSPENSION
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Steering arm type: Control Arm
- Material: Sheet Steel
- Fitting Position: Rear Axle left and right
- Fitting Position: Upper
- Length: 300 mm
- Required quantity: 1
- Quality: HPS standard
To the price display, please log in
Art. No . : 52718HPS
MAPCO 52718HPS CONTROL ARM
Manufacturer: MAPCO
Product Info:
- Steering arm type: Control Arm
- Material: Sheet Steel
- Fitting Position: Rear Axle left and right
- Fitting Position: Upper
- Length: 300 mm
- Required quantity: 2
- Quality: HPS standard
To the price display, please log in
Art. No . : 52720
MAPCO 52720 CONTROL ARM
Manufacturer: MAPCO
Product Info:
- Steering arm type: Control Arm
- Material: Sheet Steel
- Fitting Position: Rear Axle Left
- Fitting Position: Lower
- Length: 298,0 mm
- Paired article numbers: 52721
- Required quantity: 1
- Chassis number to: 1T-9-090 000
To the price display, please log in
Art. No . : 52721
MAPCO 52721 CONTROL ARM
Manufacturer: MAPCO
Product Info:
- Steering arm type: Control Arm
- Material: Sheet Steel
- Fitting Position: Rear Axle Right
- Fitting Position: Lower
- Length: 298,0 mm
- Paired article numbers: 52720
- Required quantity: 1
- Chassis number to: 1T-9-090 000
To the price display, please log in
Art. No . : 52742
MAPCO 52742 CONTROL ARM
Manufacturer: MAPCO
Product Info:
- Steering arm type: Control Arm
- Material: Sheet Steel
- Fitting Position: Rear Axle left and right
- Fitting Position: Lower
- Required quantity: 2
To the price display, please log in
Art. No . : 52775
MAPCO 52775 CONTROL ARM
Manufacturer: MAPCO
Product Info:
- Steering arm type: Trailing Arm
- Material: Sheet Steel
- Fitting Position: Rear Axle Left
- Fitting Position: Lower
- Paired article numbers: 52776
- Required quantity: 1
To the price display, please log in
Art. No . : 52776
MAPCO 52776 CONTROL ARM
Manufacturer: MAPCO
Product Info:
- Steering arm type: Trailing Arm
- Material: Sheet Steel
- Fitting Position: Rear Axle Right
- Fitting Position: Lower
- Paired article numbers: 52775
- Required quantity: 1
To the price display, please log in
Art. No . : 53285
MAPCO 53285 SUSPENSION KIT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Right
- Fitting Position: Lower
- Supplementary Article/Info 2: with ball joint
- Cone Size: 15,3 mm
- Supplementary Article/Info 2: with lock screw set
- Supplementary Article/Info 2: with rubber mounting
- Paired article numbers: 53288
- Required quantity: 1
To the price display, please log in
Art. No . : 53288
MAPCO 53288 SUSPENSION KIT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Fitting Position: Lower
- Supplementary Article/Info 2: with ball joint
- Cone Size: 15,3 mm
- Supplementary Article/Info 2: with lock screw set
- Supplementary Article/Info 2: with rubber mounting
- Paired article numbers: 53285
- Required quantity: 1
To the price display, please log in
Art. No . : 53719
MAPCO 53719 LINK SET, WHEEL SUSPENSION
Manufacturer: MAPCO
Product Info:
- Steering arm type: Control Arm
- Material: Sheet Steel
- Fitting Position: Rear Axle left and right
- Fitting Position: Lower
- Supplementary Article/Info 2: with rubber mounting
- Supplementary Article/Info 2: with lock screw set
- Required quantity: 2
To the price display, please log in
Art. No . : 53726
MAPCO 53726 LINK SET, WHEEL SUSPENSION
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Steering arm type: Control Arm
- Supplementary Article/Info 2: with ball joint
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Fitting Position: Lower
- Required quantity: 1
To the price display, please log in
Art. No . : 53726/1
MAPCO 53726/1 LINK SET, WHEEL SUSPENSION
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Steering arm type: Control Arm
- Material: Cast Steel
- Supplementary Article/Info 2: with ball joint
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Supplementary Article/Info 2: with coupling rod
- Steering: with tie rod end
- Supplementary Article/Info 2: with axle joint
- Required quantity: 1
- Construction year to: 2009/05
To the price display, please log in
Art. No . : 53742
MAPCO 53742 LINK SET, WHEEL SUSPENSION
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Steering arm type: Control Arm
- Supplementary Article/Info 2: without lock screw set
- Fitting Position: Rear Axle Left
- Fitting Position: Rear Axle Right
- Fitting Position: Upper
- Fitting Position: Lower
- Supplementary Article/Info 2: with coupling rod
- Required quantity: 1
To the price display, please log in
Art. No . : 53742/1
MAPCO 53742/1 MAPCO KIT 6 WISHBONE CONTROL ARMS CONNECTORS + ALL SCREWS
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Steering arm type: Control Arm
- Supplementary Article/Info 2: with lock screw set
- Fitting Position: Rear Axle left and right
- Fitting Position: Upper
- Fitting Position: Lower
- Supplementary Article/Info 2: with coupling rod
- Required quantity: 1
To the price display, please log in
Art. No . : 53742/2
MAPCO 53742/2 LINK SET, WHEEL SUSPENSION
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Steering arm type: Control Arm
- Fitting Position: Rear Axle left and right
- Fitting Position: Lower
- Supplementary Article/Info 2: with lock screw set
- Supplementary Article/Info 2: with coupling rod
- Required quantity: 1
- Chassis number to: 1T-9-090 000
To the price display, please log in
Art. No . : 53825/5HPS
MAPCO 53825/5HPS REPAIR KIT, STABILIZER COUPLING ROD
Manufacturer: MAPCO
Product Info:
- Rod/Strut: Coupling Rod
- Quantity Unit: Kit
- Fitting Position: Front Axle left and right
- Length: 290 mm
- Outer thread: M12x1,75 mm
- Required quantity: 1
- Quality: HPS standard
To the price display, please log in
Art. No . : 53825HPS
MAPCO 53825HPS REPAIR KIT, STABILIZER COUPLING ROD
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Rod/Strut: Coupling Rod
- Quantity Unit: Kit
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Length: 335 mm
- Outer thread: M12x1,75 mm
- Required quantity: 1
To the price display, please log in
Art. No . : 53826
MAPCO 53826 REPAIR KIT, TIE ROD
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Fitting Position: Front Axle left and right
- Vehicle Equipment: for vehicles with power steering
- Supplementary Article/Info 2: with steering bellows
- Supplementary Article/Info 2: with clamps
- Required quantity: 1
To the price display, please log in
Art. No . : 53829HPS
MAPCO 53829HPS REPAIR KIT, STABILIZER COUPLING ROD
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Rod/Strut: Coupling Rod
- Quantity Unit: Kit
- Fitting Position: Rear Axle Left
- Fitting Position: Rear Axle Right
- Required quantity: 1
To the price display, please log in
Art. No . : 54754
MAPCO 54754 CONTROL ARM
Manufacturer: MAPCO
Product Info:
- Steering arm type: Control Arm
- Material: Sheet Steel
- Fitting Position: Rear Axle left and right
- Fitting Position: Lower
- Fitting Position: Front
- Length to: 298 mm
- Inner diameter: 14 mm
- Inner diameter: 12 mm
- Required quantity: 2
To the price display, please log in
Art. No . : 55703
MAPCO 55703 CONTROL ARM
Manufacturer: MAPCO
Product Info:
- Steering arm type: Control Arm
- Material: Metal
- Fitting Position: Front Axle Left
- Fitting Position: Lower
- Supplementary Article/Info 2: with rubber mounting
- Supplementary Article/Info 2: without ball joint
- Paired article numbers: 55704
- Required quantity: 1
- Construction year to: 2009/05
Equipment Variant: Cross Touran
---------
Construction year from: 2009/06
To the price display, please log in
Art. No . : 55704
MAPCO 55704 CONTROL ARM
Manufacturer: MAPCO
Product Info:
- Steering arm type: Control Arm
- Material: Metal
- Fitting Position: Front Axle Right
- Fitting Position: Lower
- Supplementary Article/Info 2: without ball joint
- Supplementary Article/Info 2: with rubber mounting
- Paired article numbers: 55703
- Required quantity: 1
- Construction year to: 2009/05
Equipment Variant: Cross Touran
---------
Construction year from: 2009/06
To the price display, please log in
Art. No . : 57742
MAPCO 57742 LINK SET, WHEEL SUSPENSION
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Fitting Position: Rear Axle
- Fitting Position: Lower
- Steering arm type: Control Arm
- Material: Sheet Steel
- Supplementary Article/Info 2: with lock screw set
- Required quantity: 1
To the price display, please log in
To the price display, please log in
Steering Gears (2)
Art. No . : 29685
MAPCO 29685 STEERING GEAR
Manufacturer: MAPCO
Product Info:
- Operating Mode: Electronic
- Manufacturer Restriction: ZF - Generation II
- Supplementary Article/Info 2: with axle joint
- Number of mounting bores: 4
- Left-/right-hand drive vehicles: for left-hand drive vehicles
To the price display, please log in
Art. No . : 29685/1
MAPCO 29685/1 STEERING GEAR
Manufacturer: MAPCO
Product Info:
- Generally overhauled
- Operating Mode: Electric
- Manufacturer Restriction: ZF - Generation III
To the price display, please log in
Strut Mounts & Kits (22)
Art. No . : 32608
MAPCO 32608 RUBBER BUFFER, SUSPENSION
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle
- Height: 100,0 mm
- Required quantity: 2
- Replace in pairs only
- for PR number: G29/G30
To the price display, please log in
Art. No . : 32608/2
MAPCO 32608/2 RUBBER BUFFER, SUSPENSION
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Fitting Position: Front Axle
- Height: 100 mm
- Required quantity: 1
- for PR number: G29/G30
To the price display, please log in
Art. No . : 32837
MAPCO 32837 RUBBER BUFFER, SUSPENSION
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Height: 133 mm
- Required quantity: 2
- Shape: Oval
- Replace in pairs only
- Chassis number to: 1T-6-170 000
Suspension: for vehicles with sports suspension
To the price display, please log in
Art. No . : 32837/2
MAPCO 32837/2 RUBBER BUFFER, SUSPENSION
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Shape: Oval
- Fitting Position: Rear Axle
- Height: 133 mm
- Required quantity: 1
- Chassis number to: 1T-6-170 000
Suspension: for vehicles with sports suspension
To the price display, please log in
Art. No . : 32843
MAPCO 32843 RUBBER BUFFER, SUSPENSION
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle left and right
- Replace in pairs only
- Chassis number from: 1T-6-170 001
Suspension: for vehicles with standard suspension
Suspension: for vehicles with off-road suspension
To the price display, please log in
Art. No . : 32843/2
MAPCO 32843/2 RUBBER BUFFER, SUSPENSION
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Fitting Position: Rear Axle
- Required quantity: 1
- Chassis number from: 1T-6-170 001
To the price display, please log in
Art. No . : 32853
MAPCO 32853 RUBBER BUFFER, SUSPENSION
Manufacturer: MAPCO
Product Info:
- Replace in pairs only
- Shape: Round
- Fitting Position: Front Axle left and right
- Height: 70 mm
- Outer diameter: 56 mm
- Required quantity: 2
- Suspension: for vehicles with sports suspension
To the price display, please log in
Art. No . : 32853/2
MAPCO 32853/2 RUBBER BUFFER, SUSPENSION
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Fitting Position: Front Axle
- Shape: Round
- Height: 70 mm
- Outer diameter: 56 mm
- Required quantity: 1
- Suspension: for vehicles with sports suspension
To the price display, please log in
Art. No . : 32855
MAPCO 32855 RUBBER BUFFER, SUSPENSION
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle left and right
- Height: 80 mm
- Inner diameter: 23,3 mm
- Replace in pairs only
To the price display, please log in
Art. No . : 32855/2
MAPCO 32855/2 RUBBER BUFFER, SUSPENSION
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Fitting Position: Front Axle
- Height: 80 mm
- Inner diameter: 23 mm
- Required quantity: 1
To the price display, please log in
Art. No . : 32895
MAPCO 32895 RUBBER BUFFER, SUSPENSION
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle left and right
- Height: 143 mm
- Replace in pairs only
- Suspension: for vehicles with off-road suspension
Suspension: for vehicles with standard suspension
Chassis number to: 1T-6-170 000
To the price display, please log in
Art. No . : 32895/2
MAPCO 32895/2 RUBBER BUFFER, SUSPENSION
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Fitting Position: Rear Axle
- Height: 143 mm
- Required quantity: 1
- Suspension: for vehicles with off-road suspension
Suspension: for vehicles with standard suspension
Chassis number to: 1T-6-170 000
To the price display, please log in
Art. No . : 34039
MAPCO 34039 DUST COVER KIT, SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Shape: Round
- Fitting Position: Front Axle
- Required quantity: 1
- Suspension: for vehicles with sports suspension
To the price display, please log in
Art. No . : 34822
MAPCO 34822 DUST COVER KIT, SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Shape: Oval
- Required quantity: 1
- Chassis number to: 1T-6 157 500
To the price display, please log in
Art. No . : 34824
MAPCO 34824 DUST COVER KIT, SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Right
- Fitting Position: Front Axle Left
- Required quantity: 1
- Suspension: for vehicles with standard suspension
To the price display, please log in
Art. No . : 34828
MAPCO 34828 DUST COVER KIT, SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Required quantity: 1
- Quantity per Axle: 1
- Shape: Round
- Suspension: for vehicles with electronic suspension control
To the price display, please log in
Art. No . : 34871
MAPCO 34871 REPAIR KIT
Manufacturer: MAPCO
Product Info:
- Supplementary Article/Info 2: with anti-friction bearing
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Required quantity: 2
To the price display, please log in
Art. No . : 34871/2
MAPCO 34871/2 REPAIR KIT
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Supplementary Article/Info 2: with anti-friction bearing
- Required quantity: 1
To the price display, please log in
Art. No . : 34872
MAPCO 34872 DUST COVER KIT, SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle
- Required quantity: 1
- Suspension: for vehicles with electronic suspension control
To the price display, please log in
Art. No . : 37851
MAPCO 37851 ANTI-FRICTION BEARING, SUSPENSION STRUT SUPPORT MOUNTING
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle left and right
- Outer diameter: 112 mm
- Required quantity: 2
- Replace in pairs only
To the price display, please log in
Art. No . : 37852
MAPCO 37852 TOP STRUT MOUNTING
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle left and right
- Supplementary Article/Info 2: without anti-friction bearing
- Inner diameter: 14 mm
- Required quantity: 2
- Replace in pairs only
To the price display, please log in
Art. No . : 37859
MAPCO 37859 TOP STRUT MOUNTING
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle Upper
- Shape: Round
- Supplementary Article/Info 2: without anti-friction bearing
- Required quantity: 2
- Replace in pairs only
To the price display, please log in
Stub Axle Wheel Suspension (8)
Art. No . : 107773
MAPCO 107773 STUB AXLE, WHEEL SUSPENSION
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle Left
- Diameter: 32 mm
- Paired article numbers: 107774
- Required quantity: 1
To the price display, please log in
Art. No . : 107773/1
MAPCO 107773/1 REPAIR KIT, STUB AXLE
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle Left
- Rim Hole Number: 5,0
- Inner diameter: 32 mm
- Supplementary Article/Info 2: with wheel bearing
- Supplementary Article/Info 2: with integrated magnetic sensor ring
- Paired article numbers: 107774/1
- Required quantity: 1
To the price display, please log in
Art. No . : 107774
MAPCO 107774 STUB AXLE, WHEEL SUSPENSION
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle Right
- Diameter: 32 mm
- Paired article numbers: 107773
- Required quantity: 1
To the price display, please log in
Art. No . : 107774/1
MAPCO 107774/1 REPAIR KIT, STUB AXLE
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle Right
- Rim Hole Number: 5,0
- Inner diameter: 32 mm
- Supplementary Article/Info 2: with wheel bearing
- Supplementary Article/Info 2: with integrated magnetic sensor ring
- Paired article numbers: 107773/1
- Required quantity: 1
To the price display, please log in
Art. No . : 107779
MAPCO 107779 STUB AXLE, WHEEL SUSPENSION
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Diameter: 54.6 mm
- Paired article numbers: 107780
- Required quantity: 1
- Construction year from: 2007/01
To the price display, please log in
Art. No . : 107779/1
MAPCO 107779/1 REPAIR KIT, STUB AXLE
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Rim Hole Number: 5,0
- Supplementary Article/Info 2: with wheel bearing
- Internal Teeth, wheel side: 36,0
- Supplementary Article/Info 2: with integrated magnetic sensor ring
- Supplementary Article/Info 2: with sensor
- Sensor Type: Hall Sensor
- Paired article numbers: 107780/1
- Required quantity: 1
To the price display, please log in
Art. No . : 107780
MAPCO 107780 STUB AXLE, WHEEL SUSPENSION
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Right
- Diameter: 54.6 mm
- Paired article numbers: 107779
- Required quantity: 1
- Construction year from: 2007/01
To the price display, please log in
Art. No . : 107780/1
MAPCO 107780/1 REPAIR KIT, STUB AXLE
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Right
- Internal Teeth, wheel side: 36
- Supplementary Article/Info 2: with wheel bearing
- Supplementary Article/Info 2: with integrated magnetic sensor ring
- Supplementary Article/Info 2: with sensor
- Sensor Type: Hall Sensor
- Paired article numbers: 107779/1
- Required quantity: 1
To the price display, please log in
Suspension Kit (2)
Art. No . : 53285
MAPCO 53285 SUSPENSION KIT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Right
- Fitting Position: Lower
- Supplementary Article/Info 2: with ball joint
- Cone Size: 15,3 mm
- Supplementary Article/Info 2: with lock screw set
- Supplementary Article/Info 2: with rubber mounting
- Paired article numbers: 53288
- Required quantity: 1
To the price display, please log in
Art. No . : 53288
MAPCO 53288 SUSPENSION KIT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Fitting Position: Lower
- Supplementary Article/Info 2: with ball joint
- Cone Size: 15,3 mm
- Supplementary Article/Info 2: with lock screw set
- Supplementary Article/Info 2: with rubber mounting
- Paired article numbers: 53285
- Required quantity: 1
To the price display, please log in
Thermostat & Thermostat Housing (2)
Art. No . : 28801
MAPCO 28801 THERMOSTAT, COOLANT
Manufacturer: MAPCO
Product Info:
- Opening Temperature: 87 °C
- Supplementary Article/Supplementary Info: with seal
- Diameter 1: 54 mm
- Diameter 2: 35 mm
- Height 1: 31 mm
- Construction year from: 2005/12
Construction year to: 2006/11
To the price display, please log in
Art. No . : 28870
MAPCO 28870 COOLANT FLANGE
Manufacturer: MAPCO
Product Info:
- Supplementary Article/Supplementary Info: with seal
- Supplementary Article/Info 2: without engine temperature sensor
To the price display, please log in
Tie Rod (2)
Art. No . : 51728
MAPCO 51728 ROD ASSEMBLY
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Paired article numbers: 51729
- Required quantity: 1
To the price display, please log in
Art. No . : 51729
MAPCO 51729 ROD ASSEMBLY
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Right
- Paired article numbers: 51728
- Required quantity: 1
To the price display, please log in
Tie Rod Axle Joint (1)
Art. No . : 51723
MAPCO 51723 INNER TIE ROD END
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle left and right
- Axle Joint Length: 329 mm
- Outer thread: M16x1,5 mm
- Required quantity: 2
To the price display, please log in
Tie Rod End (4)
Art. No . : 51740
MAPCO 51740 TIE ROD END
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Inner thread: M16x1,5 mm
- Cone Size: 13,2 mm
- Required quantity: 1
- Paired article numbers: 51741
To the price display, please log in
Art. No . : 51741
MAPCO 51741 TIE ROD END
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Right
- Inner thread: M16x1,5 mm
- Cone Size: 13,2 mm
- Required quantity: 1
- Paired article numbers: 51740
To the price display, please log in
Art. No . : 51826
MAPCO 51826 TIE ROD END
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Length: 94,0 mm
- Inner thread: M16x1,5 mm
- Outer thread: M12x1,5 mm
- Cone Size: 13,2 mm
- Paired article numbers: 51827
- Required quantity: 1
To the price display, please log in
Art. No . : 51827
MAPCO 51827 TIE ROD END
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Right
- Length: 94,0 mm
- Inner thread: M16x1,5 mm
- Outer thread: M12x1,5 mm
- Cone Size: 13,2 mm
- Paired article numbers: 51826
- Required quantity: 1
To the price display, please log in
Tie Rod Repair Kit (1)
Art. No . : 53826
MAPCO 53826 REPAIR KIT, TIE ROD
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Fitting Position: Front Axle left and right
- Vehicle Equipment: for vehicles with power steering
- Supplementary Article/Info 2: with steering bellows
- Supplementary Article/Info 2: with clamps
- Required quantity: 1
To the price display, please log in