Order-Hotline
+372 6017 913
Payments
Pre-payment OR invoice
Shipping Services
DPD Classic International
ALM › Old Vehicle Part Search
Alle Ersatz-& Verschleißteile passend für MAZDA 626 IV Hatchback (GE) 2.0 i (GE10S1)
ABS Rings (2)
Art. No . : 76536
MAPCO 76536 SENSOR RING, ABS
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle left and right
- Number of Teeth: 44
- Width: 7,0 mm
- Inner diameter: 78,0 mm
- Outer diameter: 96,5 mm
To the price display, please log in
Art. No . : 76584
MAPCO 76584 SENSOR RING, ABS
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle left and right
- Number of Teeth: 44
- Width: 11,3 mm
- Inner diameter: 78,0 mm
- Outer diameter: 96,6 mm
- Transmission Type: Manual Transmission
To the price display, please log in
Accessories (1)
Art. No . : 76999
MAPCO 76999 TEST UNIT, SENSOR RING
Manufacturer: MAPCO
To the price display, please log in
Air Filter (1)
Art. No . : 60534
MAPCO 60534 AIR FILTER
Manufacturer: MAPCO
Product Info:
- Filter type: Filter Insert
- Shape: Tetragonal
- Length: 258,5 mm
- Width: 164 mm
- Height: 40 mm
To the price display, please log in
Ball Joint (1)
Art. No . : 19587
MAPCO 19587 BALL JOINT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Lower
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Cone Size: 18 mm
- Outer diameter: 43 mm
- Supplementary Article/Info 2: with fastening material
- Required quantity: 2
To the price display, please log in
Bellow Steering (1)
Art. No . : 29997/1
MAPCO 29997/1 BELLOW SET, STEERING
Manufacturer: MAPCO
Product Info:
- Inner diameter 1: 10,0 mm
- Inner diameter 2: 27,0 mm
- Height: 17,0 mm
To the price display, please log in
Brake & Clutch Slave Cylinder (1)
Art. No . : 2618
MAPCO 2618 WHEEL BRAKE CYLINDER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Piston Diameter: 17,46 mm
To the price display, please log in
Brake Calipers (2)
Art. No . : 4502
MAPCO 4502 BRAKE CALIPER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- New part without deposit
- Used part return not required
- paired article number: 4503
- Piston Diameter: 57 mm
- Brake Caliper Type: Fist-type Caliper
- Brake System: AKE
To the price display, please log in
Art. No . : 4503
MAPCO 4503 BRAKE CALIPER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Right
- New part without deposit
- Used part return not required
- paired article number: 4502
- Piston Diameter: 57 mm
- Brake Caliper Type: Fist-type Caliper
- Brake System: AKE
To the price display, please log in
Brake Discs (6)
Art. No . : 103530
FRENIX 103530 BRAKE DISC
Product Info:
- Brake Disc Type: Vented
- Outer diameter: 258,0 mm
- Brake Disc Thickness: 24,0 mm
- Minimum thickness: 22,0 mm
- Height: 48,6 mm
- Inner diameter: 142,5 mm
- Bore Ø: 13,0 mm
- Number of Holes: 5
- Bolt Hole Circle Ø: 114,3 mm
- Centering Diameter: 72,0 mm
- Manufacturer Approval: Frenix
- Fitting Position: Front Axle
To the price display, please log in
Art. No . : 103530/2
FRENIX 103530/2 BRAKE DISC
Product Info:
- Required quantity: 1
- Brake Disc Type: Vented
- Outer diameter: 258,0 mm
- Brake Disc Thickness: 24,0 mm
- Minimum thickness: 22,0 mm
- Height: 48,6 mm
- Inner diameter: 142,5 mm
- Bore Ø: 13,0 mm
- Number of Holes: 5
- Bolt Hole Circle Ø: 114,3 mm
- Centering Diameter: 72,0 mm
- Manufacturer Approval: Frenix
To the price display, please log in
Art. No . : 15530
MAPCO 15530 BRAKE DISC
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle
- Brake Disc Thickness: 24,0 mm
- Outer diameter: 258,0 mm
- Brake Disc Type: Vented
- Bolt Hole Circle Ø: 114,3 mm
- Number of Holes: 5
To the price display, please log in
Art. No . : 15530C
MAPCO 15530C BRAKE DISC
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle
- Surface: Coated
- Brake Disc Thickness: 24,0 mm
- Outer diameter: 258,0 mm
- Brake Disc Type: Vented
- Bolt Hole Circle Ø: 114,3 mm
- Number of Holes: 5
To the price display, please log in
Art. No . : 15536
MAPCO 15536 BRAKE DISC
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Brake Disc Type: Solid
- Outer diameter: 261,0 mm
- Brake Disc Thickness: 10,0 mm
- Bolt Hole Circle Ø: 114,3 mm
- Number of Holes: 5
To the price display, please log in
Art. No . : 15536C
MAPCO 15536C BRAKE DISC
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Surface: Coated
- Brake Disc Type: Solid
- Outer diameter: 261,0 mm
- Brake Disc Thickness: 10,0 mm
- Bolt Hole Circle Ø: 114,3 mm
- Number of Holes: 5
To the price display, please log in
Brake Fluid (2)
Art. No . : 9040/2
MAPCO 9040/2 BRAKE FLUID
Manufacturer: MAPCO
Product Info:
- DOT specification: DOT 4
- Packing Type: Bottle
- Content: 1 litre
- DIN / ISO: ISO 4925 Class 6
- Dry Boiling Point: 270 °C
- Wet Boiling Point: 170 °C
- Manufacturer Approval: FMVSS 116 DOT 3
- Manufacturer Approval: FMVSS 116 DOT 4
- Manufacturer Approval: SAE J 1703
- Manufacturer Approval: SAE J 1704
To the price display, please log in
Art. No . : 9040/3
MAPCO 9040/3 BRAKE FLUID
Manufacturer: MAPCO
Product Info:
- DOT specification: DOT 4
- DIN / ISO: ISO 4925 Class 6
- Packing Type: Canister
- Content: 5 litre
- Dry Boiling Point: 270 °C
- Wet Boiling Point: 170 °C
- Manufacturer Approval: FMVSS 116 DOT 3
- Manufacturer Approval: FMVSS 116 DOT 4
- Manufacturer Approval: SAE J 1703
- Manufacturer Approval: SAE J 1704
To the price display, please log in
Brake Hoses (1)
Art. No . : 3563
MAPCO 3563 BRAKEHOSE
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Length: 428 mm
To the price display, please log in
Brake Kits (2)
Art. No . : 101511
FRENIX 101511 BRAKE SET, DISC BRAKE
Product Info:
- Fitting Position: Front Axle
- Outer diameter: 258,0 mm
- Number of Holes: 5
- Brake Disc Type: Vented
- Brake System: SUMI
- Quantity Unit: Set
- Multi-piece: Multi-piece
- Manufacturer Approval: Frenix
To the price display, please log in
Art. No . : 47511
MAPCO 47511 BRAKE SET, DISC BRAKE
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle
- Brake System: SUMI
- Brake Disc Type: Vented
- Outer diameter: 258,0 mm
- Number of Holes: 5
- Multi-piece: Multi-piece
- Quantity Unit: Set
- Brake Disc Thickness: 24 mm
To the price display, please log in
Brake Pads (3)
Art. No . : 102657
FRENIX 102657 BRAKE PAD SET, DISC BRAKE
Product Info:
- Fitting Position: Front Axle
- Width: 132,0 mm
- Thickness: 15,8 mm
- Height: 51,5 mm
- Supplementary Article/Info 2: with anti-squeak plate
- Wear Warning Contact: with acoustic wear warning
- Brake System: AKE
- Manufacturer Approval: Frenix
To the price display, please log in
Art. No . : 6656
MAPCO 6656 BRAKE PAD SET, DISC BRAKE
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Thickness: 13,5 mm
- Width: 100,0 mm
- Height: 44,0 mm
- Supplementary Article/Info 2: with anti-squeak plate
- Construction year from: 1991/09
To the price display, please log in
Art. No . : 6657
MAPCO 6657 BRAKE PAD SET, DISC BRAKE
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle
- Brake System: AKE
- Thickness: 15,8 mm
- Width: 132,0 mm
- Height: 51,5 mm
- Supplementary Article/Info 2: with anti-squeak plate
- Wear Warning Contact: with acoustic wear warning
To the price display, please log in
Bushings (4)
Art. No . : 33530
MAPCO 33530 MOUNTING, CONTROL/TRAILING ARM
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Fitting Position: Lower
- Fitting Position: Rear
- paired article number: 33531
- Mounting Type: Rubber-Metal Mount
- Control/Trailing Arm Type: for control arm
- Inner diameter: 18 mm
- Required quantity: 1
To the price display, please log in
Art. No . : 33531
MAPCO 33531 MOUNTING, CONTROL/TRAILING ARM
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Right
- Fitting Position: Lower
- Fitting Position: Rear
- paired article number: 33530
- Mounting Type: Rubber-Metal Mount
- Control/Trailing Arm Type: for control arm
- Inner diameter: 18 mm
- Required quantity: 1
To the price display, please log in
Art. No . : 33532/4
MAPCO 33532/4 MOUNTING, STABILIZER COUPLING ROD
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle left and right
- Material: Elastomer
- Required quantity: 1
To the price display, please log in
Art. No . : 33534
MAPCO 33534 MOUNTING, CONTROL/TRAILING ARM
Manufacturer: MAPCO
Product Info:
- Fitting Position: Lower
- Fitting Position: Front
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Mounting Type: Rubber-Metal Mount
- Control/Trailing Arm Type: for control arm
- Inner diameter: 12 mm
- Outer diameter: 40,0 mm
- Required quantity: 2
To the price display, please log in
CV Boot Kit (23)
Art. No . : 17983
MAPCO 17983 MOUNTING CONE, BELLOW
Manufacturer: MAPCO
Product Info:
- Diameter to: 94 mm
To the price display, please log in
Art. No . : 17984
MAPCO 17984 MOUNTING CONE, BELLOW
Manufacturer: MAPCO
Product Info:
- Diameter to: 110 mm
To the price display, please log in
Art. No . : 17988
MAPCO 17988 HOSE CLAMP
Manufacturer: MAPCO
Product Info:
- Diameter from: 25,0 mm
- Diameter to: 125,0 mm
- Scope: 100,0 mm
- Quantity Unit: Piece
- Required quantity: 1
To the price display, please log in
Art. No . : 17988/10
MAPCO 17988/10 HOSE CLAMP
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Diameter from: 25 mm
- Diameter to: 125 mm
- Scope: 100 mm
- Manufacturer Restriction: 10 Stück im Beutel
To the price display, please log in
Art. No . : 17988/50
MAPCO 17988/50 HOSE CLAMP
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Diameter from: 25 mm
- Diameter to: 125 mm
- Scope: 100 mm
To the price display, please log in
Art. No . : 17988/9
MAPCO 17988/9 CLAMPING PLIERS, BELLOW
Manufacturer: MAPCO
To the price display, please log in
Art. No . : 17991
MAPCO 17991 BELLOW, DRIVESHAFT
Manufacturer: MAPCO
Product Info:
- Height: 145 mm
- Manufacturer Restriction: für Transporter
To the price display, please log in
Art. No . : 18978
MAPCO 18978 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- reinforced version
- Inner diameter 2 of: 55 mm
- Inner diameter 2 to: 90 mm
- Manufacturer Restriction: für PKW
- Material: Polychloroprene (Neoprene)
To the price display, please log in
Art. No . : 18979
MAPCO 18979 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- reinforced version
- Number of Parts: 4 parts
- Quality: für Transporter
To the price display, please log in
Art. No . : 18990
MAPCO 18990 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- Inner diameter 2 of: 55 mm
- Inner diameter 2 to: 90 mm
- Manufacturer Restriction: für PKW
- Material: Polychloroprene (Neoprene)
To the price display, please log in
Art. No . : 18990/2
MAPCO 18990/2 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- Supplementary Article/Info 2: with clamps
To the price display, please log in
Art. No . : 18990/3
MAPCO 18990/3 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
To the price display, please log in
Art. No . : 18990/6
MAPCO 18990/6 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Multi-piece: Multi-piece
- Supplementary Article/Info 2: with clamps
To the price display, please log in
Art. No . : 18991
MAPCO 18991 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- Inner diameter 2 of: 90 mm
- Inner diameter 2 to: 120 mm
- Manufacturer Restriction: für Transporter
To the price display, please log in
Art. No . : MC00035N
MAPCO MC00035N HOSE CLAMP
Manufacturer: MAPCO
To the price display, please log in
Art. No . : MC00036N
MAPCO MC00036N HOSE CLAMP
Manufacturer: MAPCO
Product Info:
- Length: 200 mm
- Width: 2,5 mm
- Weight: 0,001 kg
- Colour: Black
- Material: Nylon
To the price display, please log in
Art. No . : MC00037N
MAPCO MC00037N HOSE CLAMP
Manufacturer: MAPCO
Product Info:
- Length: 280 mm
- Width: 4,8 mm
- Weight: 0,001 kg
- Colour: Black
- Material: Nylon
- Quantity: 100
- Weight: 1 g
To the price display, please log in
Art. No . : MC00038
MAPCO MC00038 HOSE CLAMP
Manufacturer: MAPCO
Product Info:
- Length: 370 mm
- Width: 4,8 mm
- Weight: 0,002 kg
- Colour: White
- Material: Nylon
- Quantity: 100
- Weight: 2 g
To the price display, please log in
Art. No . : MC00038N
MAPCO MC00038N HOSE CLAMP
Manufacturer: MAPCO
Product Info:
- Length: 370 mm
- Width: 4,8 mm
- Weight: 0,002 kg
- Colour: Black
- Material: Nylon
- Quantity: 100
To the price display, please log in
Art. No . : MC00060
MAPCO MC00060 HOSE CLAMP
Manufacturer: MAPCO
Product Info:
- Width: 7 mm
- Weight: 0,002 kg
- Mounting Type: Latching Connection
- Diameter from: 21 mm
- Diameter to: 45 mm
To the price display, please log in
Art. No . : MC00067
MAPCO MC00067 HOSE CLAMP
Manufacturer: MAPCO
Product Info:
- Width: 7 mm
- Weight: 0,01 kg
- Mounting Type: Latching Connection
- Diameter from: 45 mm
- Diameter to: 68 mm
- Weight: 10 g
To the price display, please log in
Art. No . : MC00070
MAPCO MC00070 HOSE CLAMP
Manufacturer: MAPCO
Product Info:
- Width: 7 mm
- Weight: 0,013 kg
- Mounting Type: Latching Connection
- Diameter from: 64 mm
- Diameter to: 122 mm
- Weight: 13 g
To the price display, please log in
Art. No . : MC00096N
MAPCO MC00096N HOSE CLAMP
Manufacturer: MAPCO
Product Info:
- Length: 450 mm
- Width: 7,6 mm
- Weight: 0,006 kg
- Colour: Black
- Material: Plastic
- Weight: 5 g
To the price display, please log in
Central Slave Cylinder & Releaser (1)
To the price display, please log in
Chemical Products (3)
Art. No . : 17987
MAPCO 17987 UNIVERSAL LUBRICANT
Manufacturer: MAPCO
Product Info:
- Packing Type: Spraycan
- Chemical Properties: Silicon-free
- Chemical Properties: Thin
- Quantity Unit: Tin
- Manufacturer Restriction: Montage-Spray
- Supplementary Article/Info 2: with PTFE (polytetrafluoroethylene)
To the price display, please log in
Art. No . : 9040/2
MAPCO 9040/2 BRAKE FLUID
Manufacturer: MAPCO
Product Info:
- DOT specification: DOT 4
- Packing Type: Bottle
- Content: 1 litre
- DIN / ISO: ISO 4925 Class 6
- Dry Boiling Point: 270 °C
- Wet Boiling Point: 170 °C
- Manufacturer Approval: FMVSS 116 DOT 3
- Manufacturer Approval: FMVSS 116 DOT 4
- Manufacturer Approval: SAE J 1703
- Manufacturer Approval: SAE J 1704
To the price display, please log in
Art. No . : 9040/3
MAPCO 9040/3 BRAKE FLUID
Manufacturer: MAPCO
Product Info:
- DOT specification: DOT 4
- DIN / ISO: ISO 4925 Class 6
- Packing Type: Canister
- Content: 5 litre
- Dry Boiling Point: 270 °C
- Wet Boiling Point: 170 °C
- Manufacturer Approval: FMVSS 116 DOT 3
- Manufacturer Approval: FMVSS 116 DOT 4
- Manufacturer Approval: SAE J 1703
- Manufacturer Approval: SAE J 1704
To the price display, please log in
Clutch Master Slave Cylinder (1)
Art. No . : 2854
MAPCO 2854 SLAVE CYLINDER, CLUTCH
Manufacturer: MAPCO
Product Info:
- Diameter: 19,0 mm
To the price display, please log in
Coil Springs (4)
Art. No . : 70531
MAPCO 70531 COIL SPRING
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle
- Spring Design: Coil Spring
- Replace in pairs only
To the price display, please log in
Art. No . : 70531/2
MAPCO 70531/2 SUSPENSION KIT, COIL SPRINGS
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle
- Quantity Unit: Set
- Spring Design: Coil Spring
- Required quantity: 1
To the price display, please log in
Art. No . : 70532
MAPCO 70532 COIL SPRING
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Spring Design: Coil Spring
- Replace in pairs only
To the price display, please log in
Art. No . : 70532/2
MAPCO 70532/2 SUSPENSION KIT, COIL SPRINGS
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Quantity Unit: Set
- Spring Design: Coil Spring
- Required quantity: 1
To the price display, please log in
Engine Timing Components (1)
Art. No . : 23765
MAPCO 23765 TENSIONER PULLEY, TIMING BELT
Manufacturer: MAPCO
Product Info:
- Outer diameter: 62 mm
- Width: 28,5 mm
To the price display, please log in
Exhaust Silencers & Mountings (37)
Art. No . : 30200
MAPCO 30200 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Fitting Position: Left and right
- Material: Stainless Steel
- Pipe Connector: Flexible
- Inner diameter: 42 mm
- Outer diameter: 67 mm
- Length: 94 mm
- Supplementary Article/Info 2: with connecting pipe
- Overall Length: 274 mm
To the price display, please log in
Art. No . : 30200/5
MAPCO 30200/5 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
To the price display, please log in
Art. No . : 30200/7
MAPCO 30200/7 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
To the price display, please log in
Art. No . : 30200/9
MAPCO 30200/9 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
To the price display, please log in
Art. No . : 30201
MAPCO 30201 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Material: Stainless Steel
- Pipe Connector: Flexible
- Supplementary Article/Info 2: with connecting pipe
- Overall Length: 390 mm
- Outer diameter: 67 mm
- Inner diameter: 42 mm
- Length: 262 mm
To the price display, please log in
Art. No . : 30202
MAPCO 30202 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Pipe Connector: Flexible
- Material: Stainless Steel
- Supplementary Article/Info 2: with connecting pipe
- Inner diameter: 45 mm
- Outer diameter: 67 mm
- Overall Length: 274 mm
- Length: 94 mm
To the price display, please log in
Art. No . : 30203
MAPCO 30203 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Pipe Connector: Flexible
- Inner diameter: 45,5 mm
- Supplementary Article/Info 2: with connecting pipe
- Overall Length: 290 mm
- Length: 150 mm
To the price display, please log in
Art. No . : 30204
MAPCO 30204 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Material: Stainless Steel
- Pipe Connector: Flexible
- Supplementary Article/Info 2: with connecting pipe
- Inner diameter: 45 mm
- Outer diameter: 67 mm
- Length: 190 mm
- Overall Length: 360 mm
To the price display, please log in
Art. No . : 30205
MAPCO 30205 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Pipe Connector: Flexible
- Supplementary Article/Info 2: with connecting pipe
- Inner diameter: 45 mm
- Outer diameter: 67 mm
- Length: 240 mm
- Overall Length: 410 mm
- Material: Stainless Steel
To the price display, please log in
Art. No . : 30206
MAPCO 30206 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Supplementary Article/Info 2: with connecting pipe
- Pipe Connector: Flexible
- One-sided / Double-sided: Left and right
- Material: Stainless Steel
- Inner diameter: 50 mm
- Outer diameter: 77 mm
- Overall Length: 390 mm
- Length: 250 mm
To the price display, please log in
Art. No . : 30207
MAPCO 30207 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 48,0 mm
- Length 1: 100 mm
- Length 2: 270 mm
- Supplementary Article/Info 2: with connecting pipe
To the price display, please log in
Art. No . : 30208
MAPCO 30208 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Pipe Connector: Flexible
- Inner diameter: 50,5 mm
- Overall Length: 280 mm
- Length: 100,0 mm
- Supplementary Article/Info 2: with connecting pipe
To the price display, please log in
Art. No . : 30209
MAPCO 30209 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 50,0 mm
- Length 1: 190 mm
- Length 2: 360 mm
- Supplementary Article/Info 2: with connecting pipe
To the price display, please log in
Art. No . : 30210
MAPCO 30210 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Material: Stainless Steel
- Pipe Connector: Flexible
- Supplementary Article/Info 2: with connecting pipe
- Inner diameter: 52 mm
- Outer diameter: 77 mm
- Length: 150 mm
- Overall Length: 290 mm
- One-sided / Double-sided: Left and right
To the price display, please log in
Art. No . : 30211
MAPCO 30211 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 55,0 mm
- Length 1: 105 mm
- Length 2: 285 mm
- Supplementary Article/Info 2: with connecting pipe
To the price display, please log in
Art. No . : 30212
MAPCO 30212 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 55,0 mm
- Length 1: 195 mm
- Length 2: 365 mm
- Supplementary Article/Info 2: with connecting pipe
To the price display, please log in
Art. No . : 30213
MAPCO 30213 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 52,0 mm
- Length 1: 105 mm
- Length 2: 275 mm
- Supplementary Article/Info 2: with connecting pipe
To the price display, please log in
Art. No . : 30214
MAPCO 30214 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 60,0 mm
- Length 1: 120 mm
- Length 2: 300 mm
- Supplementary Article/Info 2: with connecting pipe
To the price display, please log in
Art. No . : 30215
MAPCO 30215 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 50,0 mm
- Length 1: 100 mm
- Length 2: 185 mm
- Supplementary Article/Info 2: with connecting pipe
To the price display, please log in
Art. No . : 30216
MAPCO 30216 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 45 mm
- Length: 100 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30217
MAPCO 30217 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 45 mm
- Length: 150 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30219
MAPCO 30219 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 45 mm
- Length: 230 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30220
MAPCO 30220 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 50 mm
- Length: 100 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30221
MAPCO 30221 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 50 mm
- Length: 150 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30222
MAPCO 30222 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 50 mm
- Length: 200 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30223
MAPCO 30223 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 50 mm
- Length: 250 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30224
MAPCO 30224 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 55 mm
- Length: 150 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30225
MAPCO 30225 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 55 mm
- Length: 200 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30226
MAPCO 30226 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 55 mm
- Length: 280 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30227
MAPCO 30227 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 60 mm
- Length: 100 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30228
MAPCO 30228 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Specification: interlock
- Diameter: 60 mm
- Length: 150 mm
To the price display, please log in
Art. No . : 30230
MAPCO 30230 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Pipe Connector: Flexible
- Supplementary Article/Info 2: with connecting pipe
- Outer diameter: 54,0 mm
- Outer diameter 1: 45 mm
- Outer diameter 2: 48 mm
- Overall Length: 400 mm
- Length: 105 mm
To the price display, please log in
Art. No . : 30232
MAPCO 30232 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Length: 100 mm
- Pipe Ø: 55,0 mm
- Material: Stainless Steel
- Specification: Soft
To the price display, please log in
Art. No . : 30232/3
MAPCO 30232/3 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Multi-piece: Three-piece
To the price display, please log in
Art. No . : 30233
MAPCO 30233 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 60 mm
- Length: 200 mm
- Supplementary Article/Info 2: without connecting pipe
- Material: Stainless Steel
- Specification: Soft
To the price display, please log in
Art. No . : 30234
MAPCO 30234 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 70 mm
- Length: 100 mm
- Material: Stainless Steel
- Specification: Soft
To the price display, please log in
Art. No . : 30242/3
MAPCO 30242/3 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Multi-piece: Three-piece
To the price display, please log in
Filters & Filter Kits (9)
Art. No . : 29990
MAPCO 29990 HYDRAULIC FILTER, STEERING SYSTEM
Manufacturer: MAPCO
Product Info:
- New part without deposit
- Manufacturer Restriction: Schutzfilter
- Vehicle Equipment: for vehicles with power steering
- Flange Ø: 10 mm
- Filter type: In-Line Filter
- Specification: Magnetfilter
- Length: 126 mm
To the price display, please log in
Art. No . : 29990/5
MAPCO 29990/5 HYDRAULIC FILTER, STEERING SYSTEM
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Manufacturer Restriction: Schutzfilter
- Vehicle Equipment: for vehicles with power steering
- Flange Ø: 10,0 mm
- Filter type: In-Line Filter
- Specification: Magnetfilter
To the price display, please log in
Art. No . : 29991
MAPCO 29991 HYDRAULIC FILTER, STEERING SYSTEM
Manufacturer: MAPCO
Product Info:
- New part without deposit
- Flange Ø: 12,0 mm
- Filter type: In-Line Filter
- Specification: Magnetfilter
- Vehicle Equipment: for vehicles with power steering
To the price display, please log in
Art. No . : 29991/5
MAPCO 29991/5 HYDRAULIC FILTER, STEERING SYSTEM
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Manufacturer Restriction: Schutzfilter
- Flange Ø: 12,0 mm
- Filter type: In-Line Filter
- Specification: Magnetfilter
- Vehicle Equipment: for vehicles with power steering
To the price display, please log in
Art. No . : 29992
MAPCO 29992 HYDRAULIC FILTER, STEERING SYSTEM
Manufacturer: MAPCO
Product Info:
- Manufacturer Restriction: Schutzfilter
- Vehicle Equipment: for vehicles with power steering
- Filter type: In-Line Filter
- Specification: Magnetfilter
- Length: 202 mm
- Diameter 1: 10 mm
- Diameter 2: 12 mm
To the price display, please log in
Art. No . : 60534
MAPCO 60534 AIR FILTER
Manufacturer: MAPCO
Product Info:
- Filter type: Filter Insert
- Shape: Tetragonal
- Length: 258,5 mm
- Width: 164 mm
- Height: 40 mm
To the price display, please log in
Art. No . : 61557
MAPCO 61557 OIL FILTER
Manufacturer: MAPCO
Product Info:
- Filter type: Spin-on Filter
- Outer diameter: 80 mm
- Inner diameter: 57 mm
- Height: 75 mm
- Thread Size: M 20 x 1.5
- Supplementary Article/Info 2: with one anti-return valve
- Outer diameter 2: 65 mm
- Bypass Valve Opening Pressure: 1,0 bar
To the price display, please log in
Art. No . : 61562
MAPCO 61562 OIL FILTER
Manufacturer: MAPCO
Product Info:
- Filter type: Spin-on Filter
- Outer diameter: 66 mm
- Inner diameter 1: 54 mm
- Inner diameter 2: 62 mm
- Height: 90 mm
- Thread Size: M 20 X 1.5
To the price display, please log in
Art. No . : 62514
MAPCO 62514 FUEL FILTER
Manufacturer: MAPCO
Product Info:
- Filter type: In-Line Filter
- Outer diameter 1: 71 mm
- Inlet Ø: 8 mm
- Outlet Ø: 8 mm
- Height: 130 mm
- Trim Level: GE
To the price display, please log in
Fuel Filter (1)
Art. No . : 62514
MAPCO 62514 FUEL FILTER
Manufacturer: MAPCO
Product Info:
- Filter type: In-Line Filter
- Outer diameter 1: 71 mm
- Inlet Ø: 8 mm
- Outlet Ø: 8 mm
- Height: 130 mm
- Trim Level: GE
To the price display, please log in
Gas Springs Cargo Area (3)
Art. No . : 20530
MAPCO 20530 GAS SPRING, BOOT-/CARGO AREA
Manufacturer: MAPCO
Product Info:
- Fitting Position: Right
- paired article number: 20531
- Length: 495 mm
- Piston Rod Diameter: 10 mm
- Housing Diameter: 22 mm
- Stroke: 178 mm
- Eject Force: 750 N
- Replace in pairs only
To the price display, please log in
Art. No . : 20530/2
MAPCO 20530/2 GAS SPRING, BOOT-/CARGO AREA
Manufacturer: MAPCO
Product Info:
- Fitting Position: Left
- Fitting Position: Right
- Quantity Unit: Set
- Length: 495 mm
- Piston Rod Diameter: 10 mm
- Housing Diameter: 22 mm
- Stroke: 178 mm
- Eject Force: 750 N
- Required quantity: 1
To the price display, please log in
Art. No . : 20531
MAPCO 20531 GAS SPRING, BOOT-/CARGO AREA
Manufacturer: MAPCO
Product Info:
- Fitting Position: Left
- paired article number: 20530
- Length: 495 mm
- Piston Rod Diameter: 10 mm
- Housing Diameter: 22 mm
- Stroke: 178 mm
- Eject Force: 750 N
- Replace in pairs only
To the price display, please log in
HPS Coupling Rods (3)
Art. No . : 19590HPS
MAPCO 19590HPS ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- paired article number: 19591HPS
- reinforced version
- Quality: HPS standard
- Rod/Strut: Coupling Rod
- Length: 105 mm
- External Thread: M10x1,25 mm
- Required quantity: 1
- Fitting Position: Front Axle Left
To the price display, please log in
Art. No . : 19591HPS
MAPCO 19591HPS ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- paired article number: 19590HPS
- reinforced version
- Quality: HPS standard
- Rod/Strut: Coupling Rod
- Length: 105 mm
- External Thread: M10x1,25 mm
- Required quantity: 1
- Fitting Position: Front Axle Right
To the price display, please log in
Art. No . : 19592HPS
MAPCO 19592HPS ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle Left
- Fitting Position: Rear Axle Right
- reinforced version
- Quality: HPS standard
- Rod/Strut: Coupling Rod
- Length: 88 mm
- External Thread: M10x1,25 mm
- Required quantity: 2
To the price display, please log in
HPS Wiper Blades (2)
Art. No . : 104500HPS
MAPCO 104500HPS WIPER BLADE
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Wiper blade type: Hybrid Wiper Blade
- Quantity Unit: Piece
- Length: 500 mm
- Length: 20 in
- Construction year from: 1992/02
Fitting Position: Passenger Side
To the price display, please log in
Art. No . : 104525HPS
MAPCO 104525HPS WIPER BLADE
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Wiper blade type: Hybrid Wiper Blade
- Length: 525 mm
- Length: 21 in
- Quantity Unit: Piece
- Construction year from: 1992/02
Fitting Position: Driver side
To the price display, please log in
Hydraulic Filters (5)
Art. No . : 29990
MAPCO 29990 HYDRAULIC FILTER, STEERING SYSTEM
Manufacturer: MAPCO
Product Info:
- New part without deposit
- Manufacturer Restriction: Schutzfilter
- Vehicle Equipment: for vehicles with power steering
- Flange Ø: 10 mm
- Filter type: In-Line Filter
- Specification: Magnetfilter
- Length: 126 mm
To the price display, please log in
Art. No . : 29990/5
MAPCO 29990/5 HYDRAULIC FILTER, STEERING SYSTEM
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Manufacturer Restriction: Schutzfilter
- Vehicle Equipment: for vehicles with power steering
- Flange Ø: 10,0 mm
- Filter type: In-Line Filter
- Specification: Magnetfilter
To the price display, please log in
Art. No . : 29991
MAPCO 29991 HYDRAULIC FILTER, STEERING SYSTEM
Manufacturer: MAPCO
Product Info:
- New part without deposit
- Flange Ø: 12,0 mm
- Filter type: In-Line Filter
- Specification: Magnetfilter
- Vehicle Equipment: for vehicles with power steering
To the price display, please log in
Art. No . : 29991/5
MAPCO 29991/5 HYDRAULIC FILTER, STEERING SYSTEM
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Manufacturer Restriction: Schutzfilter
- Flange Ø: 12,0 mm
- Filter type: In-Line Filter
- Specification: Magnetfilter
- Vehicle Equipment: for vehicles with power steering
To the price display, please log in
Art. No . : 29992
MAPCO 29992 HYDRAULIC FILTER, STEERING SYSTEM
Manufacturer: MAPCO
Product Info:
- Manufacturer Restriction: Schutzfilter
- Vehicle Equipment: for vehicles with power steering
- Filter type: In-Line Filter
- Specification: Magnetfilter
- Length: 202 mm
- Diameter 1: 10 mm
- Diameter 2: 12 mm
To the price display, please log in
Joint Kit Drive Shaft (9)
Art. No . : 16582
MAPCO 16582 JOINT KIT, DRIVE SHAFT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle
- Fitting Position: Wheel Side
- Joint Type: CV Joint
- Outer gearing wheel side: 28
- Internal Teeth, wheel side: 23
- Seal Diameter: 56,0 mm
- Outer diameter: 87,0 mm
- Braking / Drive Dynamics: for vehicles without ABS
- Transmission Type: Manual Transmission
Transmission Type: Fully Automatic
To the price display, please log in
Art. No . : 16584
MAPCO 16584 JOINT KIT, DRIVE SHAFT
Manufacturer: MAPCO
Product Info:
- Joint Type: CV Joint
- Outer gearing wheel side: 28
- Internal Teeth, wheel side: 23
- Seal Diameter: 56,0 mm
- Number of Teeth, ABS ring: 44
- Fitting Position: Wheel Side
Transmission Type: Manual Transmission
Transmission Type: Fully Automatic
Braking / Drive Dynamics: for vehicles with ABS
To the price display, please log in
Art. No . : 18978
MAPCO 18978 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- reinforced version
- Inner diameter 2 of: 55 mm
- Inner diameter 2 to: 90 mm
- Manufacturer Restriction: für PKW
- Material: Polychloroprene (Neoprene)
To the price display, please log in
Art. No . : 18979
MAPCO 18979 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- reinforced version
- Number of Parts: 4 parts
- Quality: für Transporter
To the price display, please log in
Art. No . : 18990
MAPCO 18990 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- Inner diameter 2 of: 55 mm
- Inner diameter 2 to: 90 mm
- Manufacturer Restriction: für PKW
- Material: Polychloroprene (Neoprene)
To the price display, please log in
Art. No . : 18990/2
MAPCO 18990/2 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- Supplementary Article/Info 2: with clamps
To the price display, please log in
Art. No . : 18990/3
MAPCO 18990/3 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
To the price display, please log in
Art. No . : 18990/6
MAPCO 18990/6 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Multi-piece: Multi-piece
- Supplementary Article/Info 2: with clamps
To the price display, please log in
Art. No . : 18991
MAPCO 18991 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- Inner diameter 2 of: 90 mm
- Inner diameter 2 to: 120 mm
- Manufacturer Restriction: für Transporter
To the price display, please log in
Oil Filter (2)
Art. No . : 61557
MAPCO 61557 OIL FILTER
Manufacturer: MAPCO
Product Info:
- Filter type: Spin-on Filter
- Outer diameter: 80 mm
- Inner diameter: 57 mm
- Height: 75 mm
- Thread Size: M 20 x 1.5
- Supplementary Article/Info 2: with one anti-return valve
- Outer diameter 2: 65 mm
- Bypass Valve Opening Pressure: 1,0 bar
To the price display, please log in
Art. No . : 61562
MAPCO 61562 OIL FILTER
Manufacturer: MAPCO
Product Info:
- Filter type: Spin-on Filter
- Outer diameter: 66 mm
- Inner diameter 1: 54 mm
- Inner diameter 2: 62 mm
- Height: 90 mm
- Thread Size: M 20 X 1.5
To the price display, please log in
Rod Strut Stabiliser (8)
Art. No . : 19590
MAPCO 19590 ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Rod/Strut: Coupling Rod
- Length: 105 mm
To the price display, please log in
Art. No . : 19590HPS
MAPCO 19590HPS ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- paired article number: 19591HPS
- reinforced version
- Quality: HPS standard
- Rod/Strut: Coupling Rod
- Length: 105 mm
- External Thread: M10x1,25 mm
- Required quantity: 1
- Fitting Position: Front Axle Left
To the price display, please log in
Art. No . : 19591
MAPCO 19591 ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Right
- Rod/Strut: Coupling Rod
- Length: 105 mm
To the price display, please log in
Art. No . : 19591HPS
MAPCO 19591HPS ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- paired article number: 19590HPS
- reinforced version
- Quality: HPS standard
- Rod/Strut: Coupling Rod
- Length: 105 mm
- External Thread: M10x1,25 mm
- Required quantity: 1
- Fitting Position: Front Axle Right
To the price display, please log in
Art. No . : 19592
MAPCO 19592 ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Rod/Strut: Coupling Rod
To the price display, please log in
Art. No . : 19592HPS
MAPCO 19592HPS ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle Left
- Fitting Position: Rear Axle Right
- reinforced version
- Quality: HPS standard
- Rod/Strut: Coupling Rod
- Length: 88 mm
- External Thread: M10x1,25 mm
- Required quantity: 2
To the price display, please log in
Art. No . : 59530
MAPCO 59530 ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Right
- Rod/Strut: Coupling Rod
- Material: Steel
To the price display, please log in
Art. No . : 59531
MAPCO 59531 ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Rod/Strut: Coupling Rod
- Material: Steel
- Length: 105 mm
To the price display, please log in
Rubber Pad Trolley Jack & Lifting Platforms (1)
Art. No . : 39999
MAPCO 39999 SUPPORT PLATE, MOBILE JACK
Manufacturer: MAPCO
Product Info:
- Material: Elastomer
- Outer diameter: 65 mm
- Height: 25 mm
To the price display, please log in
Screw Nuts Small Parts (1)
Art. No . : 26754/9
MAPCO 26754/9 SCREW
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle
- Length: 72 mm
- External Thread: M16 x 1,5 mm
- Quality/ Grade: 8.8
- Bolt Head-/Nut Design: Hexagon Socket
To the price display, please log in
Sensor Coolant Temperature (1)
Art. No . : 88562
MAPCO 88562 SENDER UNIT, COOLANT TEMPERATURE
Manufacturer: MAPCO
Product Info:
- Thread Size: M12 x 1,5
- Colour: Green
- Number of connectors: 2
To the price display, please log in
Shock Absorbers (5)
Art. No . : 20593
MAPCO 20593 SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- paired article number: 20594
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Replace in pairs only
- Trim Level: GE 1
Suspension: for vehicles without electronic suspension control
Vehicle Equipment: for vehicles without four wheel steering
Vehicle Equipment: for vehicles without leveling control
To the price display, please log in
Art. No . : 20593/4
MAPCO 20593/4 SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Shock Absorber Type: Gas Pressure
- Quantity Unit: Set
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Required quantity: 1
- Trim Level: GE 1
Suspension: for vehicles without electronic suspension control
Vehicle Equipment: for vehicles without four wheel steering
Vehicle Equipment: for vehicles without leveling control
To the price display, please log in
Art. No . : 20594
MAPCO 20594 SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Right
- paired article number: 20593
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Replace in pairs only
- Trim Level: GE 1
Suspension: for vehicles without electronic suspension control
Vehicle Equipment: for vehicles without four wheel steering
Vehicle Equipment: for vehicles without leveling control
To the price display, please log in
Art. No . : 20595
MAPCO 20595 SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Replace in pairs only
- Construction year to: 1993/12
Trim Level: GE 1
Vehicle Identification Number to: 271863
Suspension: for vehicles without electronic suspension control
Vehicle Equipment: for vehicles without four wheel steering
Vehicle Equipment: for vehicles without leveling control
To the price display, please log in
Art. No . : 20595/2
MAPCO 20595/2 SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Quantity Unit: Set
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Required quantity: 1
- Construction year to: 1993/12
Trim Level: GE 1
Vehicle Identification Number to: 271863
Suspension: for vehicles without electronic suspension control
Vehicle Equipment: for vehicles without four wheel steering
Vehicle Equipment: for vehicles without leveling control
To the price display, please log in
Starter (1)
Art. No . : 13574
MAPCO 13574 STARTER
Manufacturer: MAPCO
Product Info:
- Used part return not required
- Voltage: 12,0 V
- Rated Power: 1,2 kW
- Number of Teeth: 10
- Rotation Direction: Clockwise rotation
- Flange Ø: 74,0 mm
- Position / Degree: rechts 50
- Number of mounting bores: 1
- Number of thread bores: 2,0
- Thread Size: M10x1,25
- Plug Type ID: 30, 50
To the price display, please log in
Starters Alternators (1)
Art. No . : 13574
MAPCO 13574 STARTER
Manufacturer: MAPCO
Product Info:
- Used part return not required
- Voltage: 12,0 V
- Rated Power: 1,2 kW
- Number of Teeth: 10
- Rotation Direction: Clockwise rotation
- Flange Ø: 74,0 mm
- Position / Degree: rechts 50
- Number of mounting bores: 1
- Number of thread bores: 2,0
- Thread Size: M10x1,25
- Plug Type ID: 30, 50
To the price display, please log in
Steering & Suspension Parts (15)
Art. No . : 19287
MAPCO 19287 SUSPENSION KIT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Fitting Position: Lower
- paired article number: 19288
- Control/Trailing Arm Type: for control arm
- Supplementary Article/Info 2: with ball joint
- Cone Size: 18 mm
- Supplementary Article/Info 2: with rubber mounting
- Required quantity: 1
To the price display, please log in
Art. No . : 19288
MAPCO 19288 SUSPENSION KIT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Right
- Fitting Position: Lower
- paired article number: 19287
- Control/Trailing Arm Type: for control arm
- Supplementary Article/Info 2: with ball joint
- Cone Size: 18 mm
- Supplementary Article/Info 2: with rubber mounting
- Required quantity: 1
To the price display, please log in
Art. No . : 19587
MAPCO 19587 BALL JOINT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Lower
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Cone Size: 18 mm
- Outer diameter: 43 mm
- Supplementary Article/Info 2: with fastening material
- Required quantity: 2
To the price display, please log in
Art. No . : 19589
MAPCO 19589 TIE ROD END
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Length: 95 mm
- Internal Thread: M14x1,5 mm
- External Thread: M12x1,25 mm
- Cone Size: 13,0 mm
- Required quantity: 2
To the price display, please log in
Art. No . : 19590
MAPCO 19590 ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Rod/Strut: Coupling Rod
- Length: 105 mm
To the price display, please log in
Art. No . : 19590HPS
MAPCO 19590HPS ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- paired article number: 19591HPS
- reinforced version
- Quality: HPS standard
- Rod/Strut: Coupling Rod
- Length: 105 mm
- External Thread: M10x1,25 mm
- Required quantity: 1
- Fitting Position: Front Axle Left
To the price display, please log in
Art. No . : 19591
MAPCO 19591 ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Right
- Rod/Strut: Coupling Rod
- Length: 105 mm
To the price display, please log in
Art. No . : 19591HPS
MAPCO 19591HPS ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- paired article number: 19590HPS
- reinforced version
- Quality: HPS standard
- Rod/Strut: Coupling Rod
- Length: 105 mm
- External Thread: M10x1,25 mm
- Required quantity: 1
- Fitting Position: Front Axle Right
To the price display, please log in
Art. No . : 19592
MAPCO 19592 ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Rod/Strut: Coupling Rod
To the price display, please log in
Art. No . : 19592HPS
MAPCO 19592HPS ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle Left
- Fitting Position: Rear Axle Right
- reinforced version
- Quality: HPS standard
- Rod/Strut: Coupling Rod
- Length: 88 mm
- External Thread: M10x1,25 mm
- Required quantity: 2
To the price display, please log in
Art. No . : 19599
MAPCO 19599 INNER TIE ROD END
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Axle Joint Length: 330 mm
- Thread Size 1: M18x1,5
- Thread Size 2: M14x1,5
- Required quantity: 2
To the price display, please log in
Art. No . : 49582
MAPCO 49582 CONTROL ARM
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Fitting Position: Lower
- paired article number: 49583
- Control/Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Required quantity: 1
To the price display, please log in
Art. No . : 49583
MAPCO 49583 CONTROL ARM
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Right
- Fitting Position: Lower
- paired article number: 49582
- Control/Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Required quantity: 1
To the price display, please log in
Art. No . : 59530
MAPCO 59530 ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Right
- Rod/Strut: Coupling Rod
- Material: Steel
To the price display, please log in
Art. No . : 59531
MAPCO 59531 ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Rod/Strut: Coupling Rod
- Material: Steel
- Length: 105 mm
To the price display, please log in
Steering Gears (2)
Art. No . : 29533
MAPCO 29533 STEERING GEAR
Manufacturer: MAPCO
Product Info:
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
To the price display, please log in
Art. No . : 29534
MAPCO 29534 STEERING GEAR
Manufacturer: MAPCO
Product Info:
- Operating Mode: Hydraulic
- Vehicle Equipment: for vehicles with power steering
- Specification: VER FOTOS
- Left-/right-hand drive vehicles: for left-hand drive vehicles
To the price display, please log in
Strut Mounts & Kits (5)
Art. No . : 32540
MAPCO 32540 PROTECTIVE CAP/BELLOW, SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle left and right
- Replace in pairs only
- Suspension: for vehicles with standard suspension
To the price display, please log in
Art. No . : 33684
MAPCO 33684 TOP STRUT MOUNTING
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle Right
- paired article number: 33685
- Supplementary Article/Info 2: without ball bearing
- Replace in pairs only
To the price display, please log in
Art. No . : 33684/5
MAPCO 33684/5 TOP STRUT MOUNTING
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Quantity Unit: Set
- Supplementary Article/Info 2: without ball bearing
- Required quantity: 1
To the price display, please log in
Art. No . : 33685
MAPCO 33685 TOP STRUT MOUNTING
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle Left
- paired article number: 33684
- Supplementary Article/Info 2: without ball bearing
- Replace in pairs only
To the price display, please log in
Art. No . : 34540
MAPCO 34540 DUST COVER KIT, SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle left and right
- Quantity Unit: Set
- Required quantity: 1
- Suspension: for vehicles with standard suspension
To the price display, please log in
Suspension Kit (2)
Art. No . : 19287
MAPCO 19287 SUSPENSION KIT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Fitting Position: Lower
- paired article number: 19288
- Control/Trailing Arm Type: for control arm
- Supplementary Article/Info 2: with ball joint
- Cone Size: 18 mm
- Supplementary Article/Info 2: with rubber mounting
- Required quantity: 1
To the price display, please log in
Art. No . : 19288
MAPCO 19288 SUSPENSION KIT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Right
- Fitting Position: Lower
- paired article number: 19287
- Control/Trailing Arm Type: for control arm
- Supplementary Article/Info 2: with ball joint
- Cone Size: 18 mm
- Supplementary Article/Info 2: with rubber mounting
- Required quantity: 1
To the price display, please log in
Thermostat & Thermostat Housing (2)
Art. No . : 28123
MAPCO 28123 THERMOSTAT, COOLANT
Manufacturer: MAPCO
Product Info:
- Opening Temperature: 82 °C
- Diameter: 64 mm
- Height: 62,5 mm
- Diameter 1: 30 mm
- Housing Type: without housing
To the price display, please log in
Art. No . : 28540
MAPCO 28540 THERMOSTAT, COOLANT
Manufacturer: MAPCO
Product Info:
- Supplementary Article/Supplementary Info: with seal
- Opening Temperature: 82 °C
- Diameter 1: 52 mm
- Diameter 2: 28 mm
- Height 1: 40 mm
- Construction year from: 1991/09
To the price display, please log in
Tie Rod Axle Joint (1)
Art. No . : 19599
MAPCO 19599 INNER TIE ROD END
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Axle Joint Length: 330 mm
- Thread Size 1: M18x1,5
- Thread Size 2: M14x1,5
- Required quantity: 2
To the price display, please log in
Tie Rod End (1)
Art. No . : 19589
MAPCO 19589 TIE ROD END
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Length: 95 mm
- Internal Thread: M14x1,5 mm
- External Thread: M12x1,25 mm
- Cone Size: 13,0 mm
- Required quantity: 2
To the price display, please log in
Track Control Arm (2)
Art. No . : 49582
MAPCO 49582 CONTROL ARM
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Fitting Position: Lower
- paired article number: 49583
- Control/Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Required quantity: 1
To the price display, please log in
Art. No . : 49583
MAPCO 49583 CONTROL ARM
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Right
- Fitting Position: Lower
- paired article number: 49582
- Control/Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Required quantity: 1
To the price display, please log in
Vee-Belts (6)
Art. No . : 240920
MAPCO 240920 V-RIBBED BELT
Manufacturer: MAPCO
Product Info:
- Length: 920 mm
- Number of ribs: 4
- Driven Units: Driven unit: alternator
To the price display, please log in
Art. No . : 240925
MAPCO 240925 V-RIBBED BELT
Manufacturer: MAPCO
Product Info:
- Length: 925,0 mm
- Number of ribs: 4,0
- Driven Units: Driven unit: alternator
To the price display, please log in
Art. No . : 251030
MAPCO 251030 V-RIBBED BELT
Manufacturer: MAPCO
Product Info:
- Length: 1030 mm
- Number of ribs: 5
- Driven Units: Driven unit: power-steering pump
To the price display, please log in
Art. No . : 251040
MAPCO 251040 V-RIBBED BELT
Manufacturer: MAPCO
Product Info:
- Length: 1040 mm
- Number of ribs: 5
- Motorcode: FS
Driven Units: Driven unit: power-steering pump
To the price display, please log in
Art. No . : 251150
MAPCO 251150 V-RIBBED BELT
Manufacturer: MAPCO
Product Info:
- Number of ribs: 5
- Length: 1150 mm
- Driven Units: Driven unit: power-steering pump
Driven Units: Driven unit: aircon compressor
To the price display, please log in
Art. No . : 251155
MAPCO 251155 V-RIBBED BELT
Manufacturer: MAPCO
Product Info:
- Length: 1155 mm
- Number of ribs: 5
- Motorcode: FS
Driven Units: Driven unit: aircon compressor
Driven Units: Driven unit: power-steering pump
To the price display, please log in
Water Pumps (1)
Art. No . : 21506
MAPCO 21506 WATER PUMP
Manufacturer: MAPCO
Product Info:
- Operating Mode: Mechanical
To the price display, please log in
Wheel Bearing Kits & Wheel Hubs (6)
Art. No . : 26289
MAPCO 26289 WHEEL BEARING KIT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle left and right
- Braking / Drive Dynamics: for vehicles without ABS
To the price display, please log in
Art. No . : 26291
MAPCO 26291 WHEEL BEARING KIT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle left and right
- Inner diameter: 33,0 mm
- Width: 73,5 mm
- Outer diameter: 140,0 mm
- Number of Teeth, ABS ring: 44,0
- Rim Hole Number: 5,0
- Braking / Drive Dynamics: for vehicles with ABS
To the price display, please log in
Art. No . : 26587
MAPCO 26587 WHEEL BEARING KIT
Manufacturer: MAPCO
Product Info:
- Width: 45 mm
- Inner diameter: 42 mm
- Outer diameter: 80 mm
- Fitting Position: Front Axle left and right
To the price display, please log in
Art. No . : 26754/9
MAPCO 26754/9 SCREW
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle
- Length: 72 mm
- External Thread: M16 x 1,5 mm
- Quality/ Grade: 8.8
- Bolt Head-/Nut Design: Hexagon Socket
To the price display, please log in
Art. No . : 46289
MAPCO 46289 WHEEL BEARING KIT
Manufacturer: MAPCO
Product Info:
- Required quantity: 1
- Quantity Unit: Set
- Multi-piece: Multi-piece
To the price display, please log in
Art. No . : 46587
MAPCO 46587 WHEEL BEARING KIT
Manufacturer: MAPCO
Product Info:
- Width: 45 mm
- Inner diameter: 42 mm
- Outer diameter: 80 mm
- Supplementary Article/Info 2: Contains two wheel bearing sets
- Fitting Position: Front Axle left and right
To the price display, please log in
Windscreen Washer Pumps (1)
Art. No . : 90563
MAPCO 90563 WATER PUMP, WINDOW CLEANING
Manufacturer: MAPCO
Product Info:
- Pump Type: Mono Pump
- Voltage: 12 V
- Number of connectors: 2
To the price display, please log in
Wiper Blades (2)
Art. No . : 104500HPS
MAPCO 104500HPS WIPER BLADE
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Wiper blade type: Hybrid Wiper Blade
- Quantity Unit: Piece
- Length: 500 mm
- Length: 20 in
- Construction year from: 1992/02
Fitting Position: Passenger Side
To the price display, please log in
Art. No . : 104525HPS
MAPCO 104525HPS WIPER BLADE
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Wiper blade type: Hybrid Wiper Blade
- Length: 525 mm
- Length: 21 in
- Quantity Unit: Piece
- Construction year from: 1992/02
Fitting Position: Driver side
To the price display, please log in
© Copyright 2007-2024 A.L.M. Automotive.OÜ - A.L.M. Automotive.OÜ
v.1.00 - All carparts fits with MAZDA 626 IV Hatchback (GE) 2.0 i (GE10S1)